1999 402 SS Camaro.
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: delaware
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
1999 402 SS Camaro.
I really don't want to do this but I think its time I start a new direction in life. I built my car with the best parts to run good, and look good, with great street manners. I don't beat my car and most of the parts on this build were all done at the same time. If you want a car that runs strong without boost, it put down 470RWHP and 433RWTQ, and then still has the potential to put down 800-1000 RWHP with a Turbo or Supercharger then look no further. Most of the work was done at Rapid MotorSports, that's who built the motor. I'm not expecting to get all my money back which is about $30K not including the car, and I'm ok with that. I just need a certain amount to change some things in my personal life. I've had this vehicle from when it was bone stock, I've done all the work and took decent care of everything. There is a small dent in the rear floor from when the drive shaft broke a couple of yrs ago, which happend on the Dyno, but it is an easy fix if it bothers you. It has yet been to the drag strip in 4 years and has never been there with this setup. I never planned on letting her go but at this time I have no choice. So save yourself the hassle having to spend thousand's of dollars and time to have something nice and take advantage of the ones who already did it for you.
1999 Camaro SS
Pewter, with Gray Leather interior.
T-tops.
6spd
111k on body alone
The complete motor, Transmission, Drive shaft, Moser 9" shocks/springs and some chassis parts all have 10,000 miles on them.
Im asking $13,000 OBO and willing to except a trade plus cash. I'll entertain any offer
.
http://www.fquick.com/garages/Chevro...SS/1999/30628/
Rapid MotorSports Built the complete Brand New Motor from Oil Pan to Intake
Motor:
402 Dominator Series 9.2:1 Compression
6.0 Iron Block
AFR 225 Cylinder Heads
Custom Camshaft -
Diamond Light weight Pistons with JE FF Rings
Callies Racemaster Forged Crank
Manley Tourlite Race Rods
Morel Lifters
ARP Head Studs
ARP Rod Bolts
Clevite Main and Rod Bearings
ARP Main Studs
Pro-Gram Billet Main Caps
Rollmaster Dual Timing Chain
Cometic Head Gaskets
Honed Block with Deck Plate
Balanced and Blue Printed
INTAKE:
Fast 90 MM Intake
Nick Williams 90mm Throttle Body
SLP Whisper Lid
Stock Mass Air
Exhaust:
Kooks 1 7/8 long tube Headers + Y-pipe
Borla Adjustable Catback
Drive train:
6spd Transmission-stage 4+, built by Six Speeds Inc.
Ram Flywheel
Spec Stage 3+ Clutch and Pressure Plate
B&M Ripper Shifter
Sphoon 3” driveshaft
Moser 9” Rearend 31 spline, true trac,extended studs, drain and fill plug. 3:70 gears, installed 1 yr ago
Fuel System:
SVO 42 LB Injectors
Nasty Performance fuel rails and fittings
Racetronix Fuel Pump
Suspension & Chassis:
QA1- 12 Way Adjustable Springs &Shocks-Front
QA1- 12 Way Adjustable Shocks-Rear
BMR Rear Springs
Subframe Connectors
Lakewood Lower Control Arms
BMR Front and Rear Sway bars
Spohn Adjustable Torque Arm
Spohn Panhard Rod
Bmr Strut Tower Brace
Exterior:
Iforged Aero Wheels Black with anodized lip.
18x9.5 Front
18x10.5 Rear
BFG kdw2 275x35x18-Front Tires
Sumitomo 295x30x18-Rear Tires
Halo Head Lights
Smoked Corner Lenses
Smoked Tail Lights
Bear Rotors
Hawk Pads
Berger Black Rear Panel
Chrome SS Package Emblems
Billet Grille
5% Window Tint
Interior:
Gray Leather
Pioneer Premier CD Player
Phoenix Gold 800 Watt Amp
Phoenix Gold Speakers
Let me know what you guys think. You can email me or PM if you have any questions.
tenderoni12@hotmail.com
Thanks LoudSS
1999 Camaro SS
Pewter, with Gray Leather interior.
T-tops.
6spd
111k on body alone
The complete motor, Transmission, Drive shaft, Moser 9" shocks/springs and some chassis parts all have 10,000 miles on them.
Im asking $13,000 OBO and willing to except a trade plus cash. I'll entertain any offer
.
http://www.fquick.com/garages/Chevro...SS/1999/30628/
Rapid MotorSports Built the complete Brand New Motor from Oil Pan to Intake
Motor:
402 Dominator Series 9.2:1 Compression
6.0 Iron Block
AFR 225 Cylinder Heads
Custom Camshaft -
Diamond Light weight Pistons with JE FF Rings
Callies Racemaster Forged Crank
Manley Tourlite Race Rods
Morel Lifters
ARP Head Studs
ARP Rod Bolts
Clevite Main and Rod Bearings
ARP Main Studs
Pro-Gram Billet Main Caps
Rollmaster Dual Timing Chain
Cometic Head Gaskets
Honed Block with Deck Plate
Balanced and Blue Printed
INTAKE:
Fast 90 MM Intake
Nick Williams 90mm Throttle Body
SLP Whisper Lid
Stock Mass Air
Exhaust:
Kooks 1 7/8 long tube Headers + Y-pipe
Borla Adjustable Catback
Drive train:
6spd Transmission-stage 4+, built by Six Speeds Inc.
Ram Flywheel
Spec Stage 3+ Clutch and Pressure Plate
B&M Ripper Shifter
Sphoon 3” driveshaft
Moser 9” Rearend 31 spline, true trac,extended studs, drain and fill plug. 3:70 gears, installed 1 yr ago
Fuel System:
SVO 42 LB Injectors
Nasty Performance fuel rails and fittings
Racetronix Fuel Pump
Suspension & Chassis:
QA1- 12 Way Adjustable Springs &Shocks-Front
QA1- 12 Way Adjustable Shocks-Rear
BMR Rear Springs
Subframe Connectors
Lakewood Lower Control Arms
BMR Front and Rear Sway bars
Spohn Adjustable Torque Arm
Spohn Panhard Rod
Bmr Strut Tower Brace
Exterior:
Iforged Aero Wheels Black with anodized lip.
18x9.5 Front
18x10.5 Rear
BFG kdw2 275x35x18-Front Tires
Sumitomo 295x30x18-Rear Tires
Halo Head Lights
Smoked Corner Lenses
Smoked Tail Lights
Bear Rotors
Hawk Pads
Berger Black Rear Panel
Chrome SS Package Emblems
Billet Grille
5% Window Tint
Interior:
Gray Leather
Pioneer Premier CD Player
Phoenix Gold 800 Watt Amp
Phoenix Gold Speakers
Let me know what you guys think. You can email me or PM if you have any questions.
tenderoni12@hotmail.com
Thanks LoudSS
Last edited by LoudSS; 09-24-2009 at 01:14 PM.
Trending Topics
#8
TECH Regular
iTrader: (3)
Join Date: Jan 2004
Location: Delaware
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
You wouldn't happen to be the guy that worked for racer X would you? I think we traded shifters and I bought your loudmouth exhaust off you. I had a 00 pewter hardtop Z28. I will be in the market VERY soon for another car (just started new job 2 weeks ago) but I am looking for a C5, but your car has me thinking.
I'm PMing you my number. My email is Hockey9885@aol.com if needed.
I'm PMing you my number. My email is Hockey9885@aol.com if needed.
Last edited by Red91vette; 09-25-2009 at 06:15 AM.
#10
Teching In
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: delaware
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Hey thanks for the compliment guys, yeah that's my car. Like I said I try to take care of it. But
Thanks for the offers everybody, but i'm looking for a daily driver guys, no race cars! because if I wanted a race car trust me, I'd keep mine, its built exactly the way I want. I'm just in position where I need money.
Red91vette, yeah I remember you! how have you been?
Thanks for the offers everybody, but i'm looking for a daily driver guys, no race cars! because if I wanted a race car trust me, I'd keep mine, its built exactly the way I want. I'm just in position where I need money.
Red91vette, yeah I remember you! how have you been?
#14
Launching!
I know some folks are kinda touchy about giving away their cam specs. It would be good to know what I'm dealing with in that area. If you dont want to post them, feel free to pm me.
#16
TECH Fanatic
iTrader: (2)
Join Date: Apr 2008
Location: Born/Raised North East, MD Lived in VA, NC, MI Back in Yorktown, Va
Posts: 1,169
Likes: 0
Received 1 Like
on
1 Post
Ty your finally putting your car up here? guys i saw this car in person and HOLY HELL a beautiful car and a nasty car. guy takes good care of it and hes a real good guy. if you buy it local give me a shout ill hook you up with a real good deal on detailing it.
#17
11 Second Club
iTrader: (6)
Join Date: Sep 2006
Location: NJ
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Interested in the car....Cash in hand...Please give me a call 732-778-two-two seven-Three
If no answer,Please leave a message with your number,I will get right back to you.
Have cash...No BS,Im right in NJ...So its only a short ride to come pick her up.
Thanks,Shawn
If no answer,Please leave a message with your number,I will get right back to you.
Have cash...No BS,Im right in NJ...So its only a short ride to come pick her up.
Thanks,Shawn
#18
Teching In
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: delaware
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Hey whats up, Dave. Thanks for the nice words. And people this guy does great detailing seriously, so if your in the area, you should look him up for a detail.
1Bad86Gn I got your number and I'll be giving you a call here in a few.
1Bad86Gn I got your number and I'll be giving you a call here in a few.
#19
TECH Fanatic
iTrader: (2)
Join Date: Apr 2008
Location: Born/Raised North East, MD Lived in VA, NC, MI Back in Yorktown, Va
Posts: 1,169
Likes: 0
Received 1 Like
on
1 Post
damn man, ty i just met this girl and she said for my 21st she will buy me WHATEVER i want. shes rich as **** so if no one buys this by mid november i might be talking to you thats if she isnt bullshitting lol