FS: 01 ss ati/mti/moser
06-06-2005, 04:05 PM
#1
On The Tree
Thread Starter
Join Date: Jun 2004
Location: south county, STL
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
FS: 01-SS Blown 348 w/all the goodies Buying a house... car has to go...
2001 camaro SS, 1 owner 40.9k on body... 500miles since new setup which include engine, moser 12 bolt, ati-p1sc procharger.. New centerforce dual friction is still being broke in.
ENGINE
348 LS1 9.5/1
MTI 2E heads w/ferra 2.02 intake and 1.56 exhaust milled .30
upgraded springs
c1 hammercam
weisco pistons
new stock rods
new rings, rod bearings, main bearings, and cam bearings
ARP main studs, head studs, and rod bolts
SLP proted oil pump
polished crank
T-56 w/pro 5.0
centerforce dual friction
NGK tr6's w/msd wires
ATI PROCHARGER
P1-sc w/ dual intercoolers @ 7.5 pounds
6 rib belt driven, 7 inch crank and 4.1 blower
Hks blow off valve
1790 K&N air filter
Moser 12 bolt
33 spline 3.73 posi w/TA cover
FLP long tube headers w/off roads and cats
borla stainless exhaust system
Fuel system
dual 255 pumps... one in tank and one in line
speed inc fuel rails w/-8 feed line and 42lb lucas injectors
LS6 intake,blower inlet hat, valve covers and plenum all painted to match car
custom 3 core radiator w/power cooler option
17inch chrome slp wheels
BFG's up front and brand new nitto drag radials sitting in my basement
BMR suspension
Wolfe 6 point bolt in roll cage
boxed lower control arms
adjustable torque arm
adjustable panhard bar
tubular K-member
boxed subframe-weld ins
160' thermo
SLP Line lock
tuned w/ls1 edit... have the cable as well
custom cooling system w/ ati fan and two 10 inch fans for insurance
sound system goes w/the car...
3 PPI amps, EQ, 1 ferret cap and kenwood flip face headunit
10 inch orion sub
3 gauge pillar w/boost, fuel pressure and air fuel ratio
5 inch tach w/shift light
5% tint on sides and rear window
Extras include a set of white 30th stripes still in box from 3rd gen decals and two new front BFG's
All the work was done professionally by joe donavan @ performance by joe in high ridge MO. Car made 549 rwhp and 499 rwtorque. Thats only at 7.5 psi... this blower is capable of 10-11 lbs w/ new pulley system.. thats well over 600 rwhp all day long... Well over 50k invested...must sacrifice for 24,000. serious inq only, if you don't have the $... do not email.
http://www.cardomain.com/ride/1088239
exhaust sound clip:
http://video.ls1tech.com/Player.aspx...9-35E231D2CA5E
Imosss2001@yahoo.com
PRICE LOWERED.... 23,000! NEEDS TO GO!
2001 camaro SS, 1 owner 40.9k on body... 500miles since new setup which include engine, moser 12 bolt, ati-p1sc procharger.. New centerforce dual friction is still being broke in.
ENGINE
348 LS1 9.5/1
MTI 2E heads w/ferra 2.02 intake and 1.56 exhaust milled .30
upgraded springs
c1 hammercam
weisco pistons
new stock rods
new rings, rod bearings, main bearings, and cam bearings
ARP main studs, head studs, and rod bolts
SLP proted oil pump
polished crank
T-56 w/pro 5.0
centerforce dual friction
NGK tr6's w/msd wires
ATI PROCHARGER
P1-sc w/ dual intercoolers @ 7.5 pounds
6 rib belt driven, 7 inch crank and 4.1 blower
Hks blow off valve
1790 K&N air filter
Moser 12 bolt
33 spline 3.73 posi w/TA cover
FLP long tube headers w/off roads and cats
borla stainless exhaust system
Fuel system
dual 255 pumps... one in tank and one in line
speed inc fuel rails w/-8 feed line and 42lb lucas injectors
LS6 intake,blower inlet hat, valve covers and plenum all painted to match car
custom 3 core radiator w/power cooler option
17inch chrome slp wheels
BFG's up front and brand new nitto drag radials sitting in my basement
BMR suspension
Wolfe 6 point bolt in roll cage
boxed lower control arms
adjustable torque arm
adjustable panhard bar
tubular K-member
boxed subframe-weld ins
160' thermo
SLP Line lock
tuned w/ls1 edit... have the cable as well
custom cooling system w/ ati fan and two 10 inch fans for insurance
sound system goes w/the car...
3 PPI amps, EQ, 1 ferret cap and kenwood flip face headunit
10 inch orion sub
3 gauge pillar w/boost, fuel pressure and air fuel ratio
5 inch tach w/shift light
5% tint on sides and rear window
Extras include a set of white 30th stripes still in box from 3rd gen decals and two new front BFG's
All the work was done professionally by joe donavan @ performance by joe in high ridge MO. Car made 549 rwhp and 499 rwtorque. Thats only at 7.5 psi... this blower is capable of 10-11 lbs w/ new pulley system.. thats well over 600 rwhp all day long... Well over 50k invested...must sacrifice for 24,000. serious inq only, if you don't have the $... do not email.
http://www.cardomain.com/ride/1088239
exhaust sound clip:
http://video.ls1tech.com/Player.aspx...9-35E231D2CA5E
Imosss2001@yahoo.com
PRICE LOWERED.... 23,000! NEEDS TO GO!
Last edited by imos-ss 01; 06-16-2005 at 10:05 AM.
Trending Topics
06-19-2005, 04:06 PM
#11
Staging Lane
Join Date: Dec 2004
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
i'm in rockford, il not too far away. right now i'm in a feud with a dealership and their pathetic work, but otherwise i'd sell my car instantly and go for urs. if i get this straightened out within the next few days i'll get back to u. my email is jermz77@yahoo.com
