For Sale: 2001 Firehawk Black, car number 0003 out of 0540
#1
For Sale: 2001 Firehawk Black, car number 0003 out of 0540
Price reduced.... updated this post, since last april, I've only put another 3,000 miles on it.
Have the 3rd car off the line from 2001. 1 owner only, bought it with 17 miles on it. 5 were from my test drive.
$11,000 firm. Car is in Good condition.
Details:
There are high miles, the first 2 years I had it, I had a 38 mile 1-way highway commute to work (garaged). It got 80,000 on it the first two years. Once I got a beater, and then my Truck, I haven't driven it much. But I have put 121K on it total in 6 1/2 years.
Have driven it from MD to Orlando twice and MD to Toronto once. Never had a problem with it.
No accidents, but someone had backed into driver door, so I had to have that door replaced. Minor scuff /crack on bottom of front fascia, and scratch on pass. side C pillar. SLP's wonderfull job painting the hood caused me to have it replainted (paint was bubbling and they wouldn't warrenty it, which got me banned from the SLP board.)
I have raced it. A lot. But... the engine has not been touched, other than the pulley and custom painted intake. Let me repeat, stock engine, stock heads, stock cam.
Car last ran 11.80 @ 114 mph. Brand new it went 12.99 on street tires.
330 rwhp.
See sig for mods.
pic:
http://myspace-012.vo.llnwd.net/0078...85605012_l.jpg
Wheels 2 SETS!
4 Chrome with original Firehawk SZ50s on them. Try finding those...
4 Powdercoated Black Firehawk rims. (tire place scratced my painted rims, so had them powdercoated.) That has Kumhos on them.
Both sets have the Hawk center caps.
It had 3.23s on it originally, but put another axle with 3.73s in there. I still have the original rear end with the gears inside. They made no noise, just needed lower gears with that stall.
Windows are tinted, 35% front, 20% back.
Normal floormats and 2 sets of Firehawk mats (1 set is still brand new and comes with rear mat, also never used.)
I paid the car off 3 years ago, title transfer will be cake. I can provide VIN number for build number verification and carfax.
Lojack installed too.
Car is quiet as can be when the cutout is closed. switch near TCS button, 5 seconds later, it sounds like a monster.
Headers are 1 7/8" Full Long tube headers into Y pipe. No Cats. Car is programmed via LS1 Edit by FBC.
4000 Stall. Very nice with the 3.73s. Best 60' was 1.58.
I have HAL shocks on it with adjustable springs in front.
Don't have the front sway bar anymore, but can replace that with OEM piece if you want.
email is edgehawk@comcast.net (can't check it from work, so be patient)
Thanks!
If you want to ask people about my car, I've been on EFA for over 7 years, was a Moderator on there until I had to devote less time to it.
www.easternfbody.com/forum
I can refer you to 2 MODs on this site who can vouch for my character.
I've been around since the start of the board, but with work and personal life, can't post much.
LS1tech member #39
Have the 3rd car off the line from 2001. 1 owner only, bought it with 17 miles on it. 5 were from my test drive.
$11,000 firm. Car is in Good condition.
Details:
There are high miles, the first 2 years I had it, I had a 38 mile 1-way highway commute to work (garaged). It got 80,000 on it the first two years. Once I got a beater, and then my Truck, I haven't driven it much. But I have put 121K on it total in 6 1/2 years.
Have driven it from MD to Orlando twice and MD to Toronto once. Never had a problem with it.
No accidents, but someone had backed into driver door, so I had to have that door replaced. Minor scuff /crack on bottom of front fascia, and scratch on pass. side C pillar. SLP's wonderfull job painting the hood caused me to have it replainted (paint was bubbling and they wouldn't warrenty it, which got me banned from the SLP board.)
I have raced it. A lot. But... the engine has not been touched, other than the pulley and custom painted intake. Let me repeat, stock engine, stock heads, stock cam.
Car last ran 11.80 @ 114 mph. Brand new it went 12.99 on street tires.
330 rwhp.
See sig for mods.
pic:
http://myspace-012.vo.llnwd.net/0078...85605012_l.jpg
Wheels 2 SETS!
4 Chrome with original Firehawk SZ50s on them. Try finding those...
4 Powdercoated Black Firehawk rims. (tire place scratced my painted rims, so had them powdercoated.) That has Kumhos on them.
Both sets have the Hawk center caps.
It had 3.23s on it originally, but put another axle with 3.73s in there. I still have the original rear end with the gears inside. They made no noise, just needed lower gears with that stall.
Windows are tinted, 35% front, 20% back.
Normal floormats and 2 sets of Firehawk mats (1 set is still brand new and comes with rear mat, also never used.)
I paid the car off 3 years ago, title transfer will be cake. I can provide VIN number for build number verification and carfax.
Lojack installed too.
Car is quiet as can be when the cutout is closed. switch near TCS button, 5 seconds later, it sounds like a monster.
Headers are 1 7/8" Full Long tube headers into Y pipe. No Cats. Car is programmed via LS1 Edit by FBC.
4000 Stall. Very nice with the 3.73s. Best 60' was 1.58.
I have HAL shocks on it with adjustable springs in front.
Don't have the front sway bar anymore, but can replace that with OEM piece if you want.
email is edgehawk@comcast.net (can't check it from work, so be patient)
Thanks!
If you want to ask people about my car, I've been on EFA for over 7 years, was a Moderator on there until I had to devote less time to it.
www.easternfbody.com/forum
I can refer you to 2 MODs on this site who can vouch for my character.
I've been around since the start of the board, but with work and personal life, can't post much.
LS1tech member #39
Last edited by Edge Hawk; 04-02-2007 at 08:54 AM.