93 Mustang LX 331 stroker, P1SC ProCharger 12lbs, much more! In NY..
#1
Teching In
Thread Starter
Join Date: Oct 2004
Location: Plattsburgh, NY
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
My cousin is thinking about selling his 93 LX. It has ALL options, sunroof and power driver seat even! A/C is cold.. 100% street car. The car has 98,000 miles on it. He has ALL receipts for the motor and parts..except for the blower, motor has less than 10,000 miles on it. Car runs good but needs a tune to make all of the potential power. Asking $13,000 b/o
Here is a quick run down:
ProCharger P1SC intercooled with 12 rib upgrade (see 12lbs)
331 stroker built by Fox Lake, 8.5:1 compression stock block
TFS Twisted Wedge heads with port/polish 1.6 FRPP roller rockers
Holley Systemax II intake
70mm TB
75MM PRO M MAF
42lb injectors
AFM PMS with 3 bar map sensor
WMS wideband
Autometer Gauges (alot)
255 in-tank and external T-Rex
EXHAUST
BBK 1 5/8 shorties
UPR X-pipe
Flowmaster catback
TRANNY
stock T-5 with steel bearing retainer
RAM billet steel flywheel
Centerforce Dual-Friction clutch ( 800 miles)
SUSPENSION
BBK upper/lowers
BBK subframe connectors
BBK caster/camber plates
BBK lowering springs
KYB shocks/struts
17" x 9.5" 03 Cobra clones Chrome
245/45 Nitto 555 in front
275/40 Nitto 555R
Rims/tires less than 1200 miles on them!!!
STEREO SYSTEM
Kenwood Excelon CD deck
Kenwood 6 channel amp
Infinity Kappas in front/rear
JL Audio 12W6 bandpass enclosure
It probably has more I am forgetting!!
email me at fiveltrdave@aol.com for more pics and info
Here is a quick run down:
ProCharger P1SC intercooled with 12 rib upgrade (see 12lbs)
331 stroker built by Fox Lake, 8.5:1 compression stock block
TFS Twisted Wedge heads with port/polish 1.6 FRPP roller rockers
Holley Systemax II intake
70mm TB
75MM PRO M MAF
42lb injectors
AFM PMS with 3 bar map sensor
WMS wideband
Autometer Gauges (alot)
255 in-tank and external T-Rex
EXHAUST
BBK 1 5/8 shorties
UPR X-pipe
Flowmaster catback
TRANNY
stock T-5 with steel bearing retainer
RAM billet steel flywheel
Centerforce Dual-Friction clutch ( 800 miles)
SUSPENSION
BBK upper/lowers
BBK subframe connectors
BBK caster/camber plates
BBK lowering springs
KYB shocks/struts
17" x 9.5" 03 Cobra clones Chrome
245/45 Nitto 555 in front
275/40 Nitto 555R
Rims/tires less than 1200 miles on them!!!
STEREO SYSTEM
Kenwood Excelon CD deck
Kenwood 6 channel amp
Infinity Kappas in front/rear
JL Audio 12W6 bandpass enclosure
It probably has more I am forgetting!!
email me at fiveltrdave@aol.com for more pics and info
#2
Teching In
Thread Starter
Join Date: Oct 2004
Location: Plattsburgh, NY
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It needs to be tuned but runs strong as is. It has a 6000rpm rev chip in it so it has not been over-revved ever. Motor will make power past that. All it needs a a good tune and will EASILY make 550+rwhp.
I ran it last year with 7-8 lbs and got a 12.68@119 with OLD dry rotted BFG Comp T/A's spinning in 3rd gear. It was also hitting the rev limiter right at the end of the 1/4 so obviously the rev limiter needs to be raised. The previous owner had it set at 6000 to not take any chances. Motor has less than 10,000 miles on it.
I ran it last year with 7-8 lbs and got a 12.68@119 with OLD dry rotted BFG Comp T/A's spinning in 3rd gear. It was also hitting the rev limiter right at the end of the 1/4 so obviously the rev limiter needs to be raised. The previous owner had it set at 6000 to not take any chances. Motor has less than 10,000 miles on it.
#6
Teching In
Thread Starter
Join Date: Oct 2004
Location: Plattsburgh, NY
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Car hooks really well now with the Nitto's, I am guessing it is not alot faster at 12lbs right now due to running so un-godly rich. I had it so it was running 11.5:1-11.8:1 last year on the lower boost.
#7
TECH Fanatic
iTrader: (7)
Join Date: Sep 2004
Location: TEXAS!!!
Posts: 1,467
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
VERY nice ride. Be advised to potential future owners on this not to try and get 550rwhp out of it due to the stock block. It likely will split! Not bashing your post, just trying to inform
ttt
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Trending Topics
#8
Teching In
Thread Starter
Join Date: Oct 2004
Location: Plattsburgh, NY
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by nomorews6
VERY nice ride. Be advised to potential future owners on this not to try and get 550rwhp out of it due to the stock block. It likely will split! Not bashing your post, just trying to inform
ttt
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#9
TECH Fanatic
iTrader: (7)
Join Date: Sep 2004
Location: TEXAS!!!
Posts: 1,467
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I say this because I bought one a while ago, and the guy swore up and down it would make 550-600 rwhp only to find out it was not adviseable.
HOWEVER --- anyone interested in this car, just know that turbo fox's are flat out awesome. www.turbomustangs.com is where you will want to research.
HOWEVER --- anyone interested in this car, just know that turbo fox's are flat out awesome. www.turbomustangs.com is where you will want to research.
#11
Teching In
Thread Starter
Join Date: Oct 2004
Location: Plattsburgh, NY
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by dantheman8253
hey were in ny are u. i really like the car and got some cash let me know