WTT: 750HP Showcar: 2002 Camaro SS, pics inside, and specs!
08-05-2006, 04:05 PM
#1
TECH Regular
Thread Starter
Join Date: Jul 2002
Location: Essexville,MI
Posts: 403
Likes: 0
Received 0 Likes
on
0 Posts
WTT: 750HP Showcar: 2002 Camaro SS, pics inside, and specs! PLEASE EMAIL ME AT autodesign21@aol.com WITH PICS OF WHAT YOU ARE OFFERING.
I am interested in trading my car that toured the ISCA show circuit and won numerous awards including best of's, super chevy picks, editor choices, and special interest awards. This cars basics are an all forged 348ci LS6 engine 9:1:1 compression, Custom dished diamond pistons, New clevite race rods, main, cam bearings, Stock heads/three angle comp valve job, Comp 918 valve springs.
Comp blower cam, 581/595 224/232 @.50 114.0,block honed with torque plates,rotating assembly ballanced,ARP head studs, rod bolts. ATI F1 procharger, all custom polished including all clamps, brackets and intercoolers polished. Almost all engine acces. polished or painted, amazing detail. TH400 trans, built for 1200HP, TCI custom built SSF 3400 converter. Mini tub to fit 19x11 in the rear, 18x9.5 up front custom built Budnik wheels, 4 point roll cage, corbeau racing seats, TA custom door panels. Engine has 200 miles on it, and will need to have a final tune done upon completion of the 500 mile break in.
Car has 8400 total miles on the body, was wet one time when I brought it home from the dealership, never seen water or rain since, strictly zaino applications. Been wetsanded and re cleared to get rid of orange peel, custom painted hood, polished fasteners everywhere(doors,ttops,hoods,trunk) The list of mods is insane.
Im really looking for a C6, but let me know what you have, bring all offers hot rods new and old, high end luxury, boats, etc, I may also trade plus cash for a high end viper/vette. Prefer, auto but will look at manuals as well. This is a chance for someone to pick up a big dollar project and continue on with it. Please email for a 3 page list of modifications or with any questions @ autodesign21@aol.com
A couple pics from a show, can snap new ones per your request. Car is truly a must see to appreciate quality of work.
I am interested in trading my car that toured the ISCA show circuit and won numerous awards including best of's, super chevy picks, editor choices, and special interest awards. This cars basics are an all forged 348ci LS6 engine 9:1:1 compression, Custom dished diamond pistons, New clevite race rods, main, cam bearings, Stock heads/three angle comp valve job, Comp 918 valve springs.
Comp blower cam, 581/595 224/232 @.50 114.0,block honed with torque plates,rotating assembly ballanced,ARP head studs, rod bolts. ATI F1 procharger, all custom polished including all clamps, brackets and intercoolers polished. Almost all engine acces. polished or painted, amazing detail. TH400 trans, built for 1200HP, TCI custom built SSF 3400 converter. Mini tub to fit 19x11 in the rear, 18x9.5 up front custom built Budnik wheels, 4 point roll cage, corbeau racing seats, TA custom door panels. Engine has 200 miles on it, and will need to have a final tune done upon completion of the 500 mile break in.
Car has 8400 total miles on the body, was wet one time when I brought it home from the dealership, never seen water or rain since, strictly zaino applications. Been wetsanded and re cleared to get rid of orange peel, custom painted hood, polished fasteners everywhere(doors,ttops,hoods,trunk) The list of mods is insane.
Im really looking for a C6, but let me know what you have, bring all offers hot rods new and old, high end luxury, boats, etc, I may also trade plus cash for a high end viper/vette. Prefer, auto but will look at manuals as well. This is a chance for someone to pick up a big dollar project and continue on with it. Please email for a 3 page list of modifications or with any questions @ autodesign21@aol.com
A couple pics from a show, can snap new ones per your request. Car is truly a must see to appreciate quality of work.
08-05-2006, 06:38 PM
#5
TECH Regular
Thread Starter
Join Date: Jul 2002
Location: Essexville,MI
Posts: 403
Likes: 0
Received 0 Likes
on
0 Posts
Open to a fair offer, but I havent really listed it for sale as of yet, just seeing what interest it would bring on a swap, if you would like to discuss a sale seriously please email.
Thank you
Thank you
Trending Topics
thats awesome...verrrrrrrrrrrrrrry nice car by the way....its cleaner than a newborn babies butt cheek 
Thanks guys for the good words, I appreciate it. 
08-06-2006, 12:38 PM
#16
TECH Regular
Thread Starter
Join Date: Jul 2002
Location: Essexville,MI
Posts: 403
Likes: 0
Received 0 Likes
on
0 Posts
Thanks please dont turn this into some bash on the 50k up top, Im looking for a trade, and the money in this car is unhealthy, I would burn it before I took 30k for it, lets hear what you guys got to swap now! 
08-06-2006, 12:39 PM
#17
Teching In
Join Date: Jul 2006
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Trust
Nice car, I think some iForged Aero's would be perfect on it, unless you find some rich guy I don't think you'll see more than 30k maximum from anybody. 50k is more than a brand new Vette.
If he's patient and the right buyer comes along he'll see more than 30. The thing to do with a car like that is take it to a major show like the rod run at Daytona. All it needs is exposure, and someone will pay or trade.
08-06-2006, 01:53 PM
#19
TECH Regular
Thread Starter
Join Date: Jul 2002
Location: Essexville,MI
Posts: 403
Likes: 0
Received 0 Likes
on
0 Posts
LOL thats awesome NEARLYGONE !! Very creative!
When I was doing the ISCA shows I had offers to buy the car outright, but wasnt ready to part at the time, thanks again for the compliments all.
Andy
When I was doing the ISCA shows I had offers to buy the car outright, but wasnt ready to part at the time, thanks again for the compliments all.
Andy
