25-2,94 camaro for sale,
#1
TECH Resident
Thread Starter
Join Date: Aug 2003
Location: aiken ,sc
Posts: 835
Likes: 0
Received 0 Likes
on
0 Posts
25-2,94 camaro for sale,
1994 camaro roller, clean overall body.. 25.2 spec cage good to 6.0@3200 lbs...pa racing tubular k-member, spohn lower a-arms,hal q1a coil overs up front, set up for coil overs in the rear, strange brakes all around(fronts alone for these cars cost over 850.00) custom anti roll bar,custom torque arm, custom lower control arms,custom pan hard bar,mini tubbed,stock floors modified for lower ride height(torque arm clearance) and cage, 9 inch, moser 35 spline axles(gun drilled and star flanged) all aluminum center section with aluminum spool and lightend 3.50 gears manual rack kit from fj smith, manual brake kit from fj smith, on/ off switch installed.. alumastars 2.0's all around 315/60/15 mt drag radials.. everything on this car is new, it has all the stock interior panels and dash, removable grant steering wheel, lights and turn signals still operate.. ..with the center section include i have over 11k in just parts into it... I might be forgetting something .... oh yeah, also comes with a 4 inch glastek cowl hood(bolt on).
heres some pics i posted on another site..
pm me with question or if you'd like to see the car in person, its located in bayshore NY..
looking to get 21k firm ...
this car cant be duplicated for this price... i'll have the dash back in it and probably have it carpeted in the next couple weeks, then i'll post more recent pics :o
any info or questions you can reach me at 631-254-1501
more picts
heres some pics i posted on another site..
pm me with question or if you'd like to see the car in person, its located in bayshore NY..
looking to get 21k firm ...
this car cant be duplicated for this price... i'll have the dash back in it and probably have it carpeted in the next couple weeks, then i'll post more recent pics :o
any info or questions you can reach me at 631-254-1501
more picts
Last edited by NRC-Motorsports; 09-29-2006 at 03:37 PM.
#5
TECH Resident
Thread Starter
Join Date: Aug 2003
Location: aiken ,sc
Posts: 835
Likes: 0
Received 0 Likes
on
0 Posts
the cardboards on the bars, so i dont scratch the paint while going in and out with the seats that handle on the floor behind the shifter is for the chute...
I just added the seats, seat covers, and shifter, which add up to over 600.00 worth of stuff,plus it also comes with a madman big block motorplate and midplate set up..... the car comes with everything in the pics and various other thing i have for it that need to get bolted up..ie, chute mounmt, master cylinder, ect,ect...
I need this car gone asap, price is now 19k firm.. need it gone
jay
Trending Topics
#10
TECH Resident
Thread Starter
Join Date: Aug 2003
Location: aiken ,sc
Posts: 835
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 427TWINTURBO
what class of racing where you building car for? wondering why you did not use a 4-link? mine is at the chassis shop now getting about the same thing done except going to use a 4-link
because with a 4 link you cant run drag radial classes.. thats technically what i built it for, radial tire racing... but you could throw a slick on it and run orsca limited street or even various other classes because it's stock suspended..i have another camaro at home that i planned on building with a 4 link and double frame rails, but plans have changed and everythings forsale..as of right now it looks like this one might be sold... guy supposedly left already and should arrive here sometime tonight and pick it up in the morning..we'll see..
jay
#11
TECH Resident
iTrader: (46)
Join Date: Dec 2001
Location: Some where in the Corn Fields of Illinois
Posts: 821
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NRC-Motorsports
because with a 4 link you cant run drag radial classes.. thats technically what i built it for, radial tire racing... but you could throw a slick on it and run orsca limited street or even various other classes because it's stock suspended..i have another camaro at home that i planned on building with a 4 link and double frame rails, but plans have changed and everythings forsale..as of right now it looks like this one might be sold... guy supposedly left already and should arrive here sometime tonight and pick it up in the morning..we'll see..
jay
jay
You should just trade me and get your old car back
#12
TECH Resident
Thread Starter
Join Date: Aug 2003
Location: aiken ,sc
Posts: 835
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SMKN TA 95
You should just trade me and get your old car back
that car was my fathers... and even though i liked it, i would'nt do that
my car got picked up this morning...some guy from Va bought it...
sold......
jay
#14
TECH Resident
Thread Starter
Join Date: Aug 2003
Location: aiken ,sc
Posts: 835
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by csjta2
I told ya it might come to virginny! Cars in good hands Jay, the buyer should do really good things with it.
jay