94 camaro Z28 t-top car. motor has about 10000 miles on it, car has bout 130,000 miles on it. Black w/ black interior.

I do daily drive the car, and I have made countless trips from starkville to hattiesburg (bout 220 miles one-way). Runs on 93 octane, and gets about 15 MPG whereever you go. Drove it from starkville to the coast, raced and drove home during CTC.

As of now the passenger side window motor, loud exhaust, and oil leak are the main things wrong with it... other than that it is just minor things. Paint is 10 footer other than 3 scrathes, interior is decent minus back seats (should still have those though) everything but A/C still works (have that stuff as well... just needs a new compressor). I got a 10.68 @ 129 out of it as well with a crappy 1.65 60 ft--- 200 shot. Should easily go 10.4s as is leaving on the kit. With a rearend and the 250 shot it is built for it could easily see 9's.

$6000 OBO----- I am willing to work something out on the listed price and problems (I have the solution to each one available) 601-616-7158

Thanks, Jeff


MOTOR SPECS

383 LT1

Eagle 4340 3.75" crank

Eagle 4340 6.0" rods

JE SRP dished pistons with plasma rings (10.9:1 compression)

comp cams cc306 cam 230/244 duration .510/.540 lift on a 112 LSA

ported melling oil pump

stock heads with gasket match and manley undercut valves, milled 22 thousandths (untouched stock intake)

1.6 roller rockers

pacesetter 1 3/4" long tube headers

th-350 w/ reverse full manual valvebody and Transbrake (built tranny with hardened 2nd gear drum and sprag... built by some guys that worked for art carr)

4000 stall

still has a 3.42 geared 10 bolt in it

Lakewood lower control arms

Lakewood panhard rod

Jegs adjustable torque arm

competition engineering subframe connectors

30lb ford racing injectors

walbro 255 ltr/hr fuel pump

Tuning software--- LT1 edit you can reflash the computer with a new tune everyday if you feel the need

I think that is it.... besides the Nitrous Express wet kit

 

Can I get some pics to bryan_anderson03@bellsouth.net Where are you located?

 

Pics to jccarpenter383@hotmail.com

 

pics to camarosf@kih.net
interested in any trades ?

 

I will send yall pics as soon as possible... may be this weekend before I can get them up though.

 

I am in Starkville, MS... it will be tomorrow before I can get pics.

 

Can I get some pics too send them too Bigjimmy2002@msn.com Thanks.

 

please send pics to camarosf@kih.net
thanks
billy

 

Thats a nice car you got but the video dont work,

 

thanks man, its good to me most of the time... runs good for what it is.


http://www.ls2.com/forums/showthread...hreadid=455095

click the second link... once the page loads click the play button below the video... I am at 1:53 and 2:12

 

what is the oil leak coming from??????? im very intrested

pics to holister925@aol.com

 

the balancer came loose a while back and fubared the front main seal, and the oil pan is leaking. It nothing to fix, I just dont have anywhere to work on it.... plus I could only justify pulling the motor if I was going to stuff a custom cam in it

 

well can i get some pics please

 

I am in class right now... they will be to ya in bout 3 hours

 

where are u located

 

starkville MS

 

 

can i get an engine shot {sflowr03 on juice's name}




take 5500?


also what do you have the trans break hooked up to?{button on shifter?}

 

The t-brake is hooked up to a momentary switch that is run by the shifter.

Ill take 5500 if you come pick it up, or pay for gas for me to drop it off. But 5500 is as low as I am gonna go. Where are you located? If you are really interested give me a call 601-616-7158.

 

car will only be for sale for another week, If I dont sell it by then I wont need to.