2001 Camaro SS DFW, Tx
10-08-2007, 02:49 AM
#1
On The Tree
Thread Starter
iTrader: (7)
Join Date: Jul 2005
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
2001 Camaro SS DFW, Tx To start off the body of the car has about 98,000 miles on it.
The engine was rebuilt and has about 2,700 miles on it.
The transmission and rearend have about 9 thousand miles on them
The motor was rebuilt by Xtreme Horsepower in NRH.
It is a 347 Ls1 with forged pistons, new rods, balanced and blueprinted crank, all new bearings, new lifters. Heads were also rebuilt with new valves and springs. Only arp bolts were used in this build.
Mti X1 cam
Speedtek lid and K&N
smooth bellows
Mti ported throttle body
New comp springs
Hooker Long tubes ceramic coated
3 in true duals w/ flo pro twisties
msd wires with new ngk's
built 4L60E
PTC 4000 stall converter
tranny cooler
3.73 gears
strut tower brace
umi sube frames
umi LCA's
umi relocation brackets
Weld draglite wheels 15x3.5 in front and 16x8 in back with like new MT ET streets.
Asking 11,500 pm me any questions
The engine was rebuilt and has about 2,700 miles on it.
The transmission and rearend have about 9 thousand miles on them
The motor was rebuilt by Xtreme Horsepower in NRH.
It is a 347 Ls1 with forged pistons, new rods, balanced and blueprinted crank, all new bearings, new lifters. Heads were also rebuilt with new valves and springs. Only arp bolts were used in this build.
Mti X1 cam
Speedtek lid and K&N
smooth bellows
Mti ported throttle body
New comp springs
Hooker Long tubes ceramic coated
3 in true duals w/ flo pro twisties
msd wires with new ngk's
built 4L60E
PTC 4000 stall converter
tranny cooler
3.73 gears
strut tower brace
umi sube frames
umi LCA's
umi relocation brackets
Weld draglite wheels 15x3.5 in front and 16x8 in back with like new MT ET streets.
Asking 11,500 pm me any questions
Last edited by erikshockey; 01-17-2008 at 01:58 AM.
