Drag Car Rolling Chassis For Sale, Cert 7.50.
#1
Launching!
Thread Starter
iTrader: (8)
Join Date: Apr 2005
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
Drag Car Rolling Chassis For Sale, Cert 7.50.
LOCATED IN HOUSTON TX.
ASKING PRICE $17,000.
-NHRA cert to 7.50's
-JOE VAN O HOOD.
-stock suspended 99 firebird
-hard top--manual windows
-the car has never been raced
-clean tittle, it was a 5 speed v6 firerbird.
-the 25.5 chassi was done by BILL BUCK RACE CARS IN AUSTIN TX.
-buch of extra bars not need it for certification.
-REMOVABLE parachute mount build by BILL BUCK.
-custom torque arm tunnel by Bill Buck.
-Full tubs, 29.5 10.5 tire fits tucked in on a 12 inch wheel.
-every suspension part, rear etc are new, includes:
-WOLF anti roll bar
-wolf LCA
-wolf panhard bar
-wolf spring perches.
-MADMAN TORQUE ARM
-moser 9 inch, aluminum center section, spool, norrowed 6 inch, 40 spline gun drilled, star flanged.
-trackstars wheels with mt rubber 15x12 rear with true 10.5
-one piece spindle mount in front with 26x4.5 mt.
-aerospace brakes.
-AJE Front suspension
-2 kirky seats
-includes full interior besides carpet.
PM ME FOR ANY QUESTION OR CALL 713-702-3163.
ASKING PRICE $17,000.
-NHRA cert to 7.50's
-JOE VAN O HOOD.
-stock suspended 99 firebird
-hard top--manual windows
-the car has never been raced
-clean tittle, it was a 5 speed v6 firerbird.
-the 25.5 chassi was done by BILL BUCK RACE CARS IN AUSTIN TX.
-buch of extra bars not need it for certification.
-REMOVABLE parachute mount build by BILL BUCK.
-custom torque arm tunnel by Bill Buck.
-Full tubs, 29.5 10.5 tire fits tucked in on a 12 inch wheel.
-every suspension part, rear etc are new, includes:
-WOLF anti roll bar
-wolf LCA
-wolf panhard bar
-wolf spring perches.
-MADMAN TORQUE ARM
-moser 9 inch, aluminum center section, spool, norrowed 6 inch, 40 spline gun drilled, star flanged.
-trackstars wheels with mt rubber 15x12 rear with true 10.5
-one piece spindle mount in front with 26x4.5 mt.
-aerospace brakes.
-AJE Front suspension
-2 kirky seats
-includes full interior besides carpet.
PM ME FOR ANY QUESTION OR CALL 713-702-3163.
Last edited by 02WSSICK; 09-29-2008 at 01:08 PM.
#3
LS1 Tech Administrator
iTrader: (14)
Looks much more sellable in painted form. Ready for contingency stickers and stripes.
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
Trending Topics
#13
LS1Tech Co-Founder
iTrader: (34)
Great car, if you want to try to finish it I know someone who might work with you and put their motor in the car in turn so they can race it this call at the LSX Shootout. PM me if interested.