camaro roller....4-link, strut front, etc.
#1
camaro roller....4-link, strut front, etc.
i feel sick to my stomach typing this right now but i am selling my car as a roller. it is a black 93 Z28 that i have had for about 10 years now. all parts are new with less than 300 street-driven miles on everything. cage is all mild steel but car is still very light. with LS1 and th350 and about 5 gallons of gas it weighed in at 2750 without driver. it is set up for LS1 and th350 or glide. set up so motor sits back as far as possible. will include dynatech headers and all exhaust because it is all made for the motor being moved back.
LS1 front end conversion
pin-on sunoco hood (goes to windshield)
pa k-member
aje front struts
aje lower a-arms
wolfe travel limiters
LS1 rack shortened for struts
racecraft bumpsteer kit
strut towers gone
cowl area completely cut and molded to firewall
manual master cylinder
wilwood prostreet font brakes
aerospace prostreet rear brakes
chassis engineering round tube backhalf
4-link with all brand new QA1 moly rod ends
jegs anti-roll bar
strange adjustable coilovers
moser 9" with aluminum center section
detroit locker with 4.30 gears
315/60 mt drag radials but can easily fit 32x16 slick
removable panel between tubs to make 4-link adjustments from inside car
removable core support to pull motor and trans right through the front
10 gallon fuel cell
all autometer gauges
prostick shifter with magnum grip
kirkey prostreet seats
painless prostreet switch panel
i could probably go on forever. i have alot of time and money in this car but priorities have changed. only thing it could use is minor work on passenger quarter where the heat from cutting the stock wheel well out bubbled the paint and the hood painted. roller does not include computer or harness.
any questions just ask. located in Hammond, IN
NEW PRICE $10k
LS1 front end conversion
pin-on sunoco hood (goes to windshield)
pa k-member
aje front struts
aje lower a-arms
wolfe travel limiters
LS1 rack shortened for struts
racecraft bumpsteer kit
strut towers gone
cowl area completely cut and molded to firewall
manual master cylinder
wilwood prostreet font brakes
aerospace prostreet rear brakes
chassis engineering round tube backhalf
4-link with all brand new QA1 moly rod ends
jegs anti-roll bar
strange adjustable coilovers
moser 9" with aluminum center section
detroit locker with 4.30 gears
315/60 mt drag radials but can easily fit 32x16 slick
removable panel between tubs to make 4-link adjustments from inside car
removable core support to pull motor and trans right through the front
10 gallon fuel cell
all autometer gauges
prostick shifter with magnum grip
kirkey prostreet seats
painless prostreet switch panel
i could probably go on forever. i have alot of time and money in this car but priorities have changed. only thing it could use is minor work on passenger quarter where the heat from cutting the stock wheel well out bubbled the paint and the hood painted. roller does not include computer or harness.
any questions just ask. located in Hammond, IN
NEW PRICE $10k
Last edited by 9sec93; 09-03-2008 at 10:18 PM.
Trending Topics
#16
Staging Lane
iTrader: (1)
Join Date: Feb 2005
Location: TX
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
car
is the cage certified? Have any more pics of inside and under the rear end?
What kind of 60ft did you have?
send pics to 92z28@suddenlink.net
Thanks
What kind of 60ft did you have?
send pics to 92z28@suddenlink.net
Thanks
#18
thanks for the offer but no, the absolute lowest i will go is $10k for roller minus the fuel pump, filter, and lines and $11k with it. only reason is i need that stuff for my other car but if it will make it easier for the buyer i will leave it there and just buy it again for my other car.
#19
is the cage certified? Have any more pics of inside and under the rear end?
What kind of 60ft did you have?
send pics to 92z28@suddenlink.net
Thanks
What kind of 60ft did you have?
send pics to 92z28@suddenlink.net
Thanks
i have not had it to the track since everything was done. oh and here is a link to more pics.
http://s27.photobucket.com/albums/c1...z/93%20camaro/