Hayabusa - Want trade for LS powered ?
#1
On The Tree
Thread Starter
iTrader: (9)
Join Date: Jun 2007
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Hayabusa - Want trade for LS powered ?
2002 Hayabusa,stock silver paint,vin#JS1GW71A322101788 clean title,11,800 miles showing on title,1000 miles on the new Carpenter built 1397 motor,JE1397 pistons,Carpenter ported B+ head,385intake,360 exhaust Mega cycle cams,Billet oil pan,Tsukigi side winder pipe with baffle,Brocks ultra clutch mod with HD springs,Major air box mod,4 short stacks,MBC race filter,Spaz fuel pump mod,24 volt starting system with new #6 welding cables and soldered on high quality eyelets,6 inch over arm with under hoop support,Mcintosh re valved busa shock,Mcintosh pro link,billet chain gard,new ek gold o ring chain,6 inch over tail section painted, stickered and it looks stock,gsxr1000 wheels with ceramic bearings,new Michelin tires front and rear,ss brake lines front and rear,wave rear brake rotor,40th anniversary complete front end,front end is strapped down with a schnitz strap,Pro tek billet gas cap,oil pressure gauge,Pingel air shifter with a on board air compressor,16 tooth front sprocket,schnitz quick release seat clips,cut/modded stock seat,schnitz rear inner aluminum tail section pan,frame is polished,swing arm is polished,just installed not used yet custom 100hp shower head NOS wet system with a Schnitz progressive nos controller,Elton Fish timing retard box,PIC3 box,billet bottle mount,2 nos bottles,the bike is now 64.5 inches long.Lights,blinkers all work,Runs and drives with no problems.Just crack it from a 5 mph roll and it will pull the front up at 6500/7000 with a 6 inch arm!!!
I do have several extra parts to include and they are a MTC lock up(2 stage)MTC billet inner hub,modded pressure plate,modded cover,springs and bolts,Mcintosh de raked front end(Complete),2 cut down busa forks by mcintosh,a cut/modded busa rad to clear the de raked frontend(with 2 small electric fans),a scotts sterring dampner(all parts to bolt onto the mcintosh frontend or a stock busa frontend),a 200 mile mint 09 (2mm)crankshaft(will make the 1397 a 1441 bolt in with a spacer plate)
The de raked front end was on the bike when the bike ran a 890 et on hp no spray/street tire, but for the street it now has the stock front end.Again the bike hasent been sprayed.The guy I got the bike from had the nos system pro. installed and then I bought the bike right after that.Call me for info.Dan 1 815 416 0593 or
dmeske12@yahoo.com $12,000 cash for everything or a fair valued trade!call or e mail will look at all trades
http://s383.photobucket.com/albums/o...albumview=grid
I do have several extra parts to include and they are a MTC lock up(2 stage)MTC billet inner hub,modded pressure plate,modded cover,springs and bolts,Mcintosh de raked front end(Complete),2 cut down busa forks by mcintosh,a cut/modded busa rad to clear the de raked frontend(with 2 small electric fans),a scotts sterring dampner(all parts to bolt onto the mcintosh frontend or a stock busa frontend),a 200 mile mint 09 (2mm)crankshaft(will make the 1397 a 1441 bolt in with a spacer plate)
The de raked front end was on the bike when the bike ran a 890 et on hp no spray/street tire, but for the street it now has the stock front end.Again the bike hasent been sprayed.The guy I got the bike from had the nos system pro. installed and then I bought the bike right after that.Call me for info.Dan 1 815 416 0593 or
dmeske12@yahoo.com $12,000 cash for everything or a fair valued trade!call or e mail will look at all trades
http://s383.photobucket.com/albums/o...albumview=grid
Last edited by turbo kid; 11-08-2008 at 11:55 AM.
#7
On The Tree
Thread Starter
iTrader: (9)
Join Date: Jun 2007
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
The photo bucket link at the bottom of the page works on a diff. web sight.I didnt change a thing and it now doesnt work here.What am I doing wrong?????The link has a bunch of photos.Thanks for any help.Dan
Trending Topics
#8
Launching!
iTrader: (6)
Join Date: Feb 2007
Location: Dover, Delaware
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
The problem is you only copied some of the link, you didnt click on the link when you copied it so its like this... www.photobucket.com....../232 the ... shouldnt be in there