84 z28 383 tci th350 art car stall and more!!!! needs to go!!!
04-28-2009, 06:28 AM
#1
12 Second Club
Thread Starter
iTrader: (34)
Join Date: Dec 2006
Location: READING Pa
Posts: 712
Likes: 0
Received 0 Likes
on
0 Posts
84 z28 383 tci th350 art car stall and more!!!! needs to go!!! I have an 84 Z28 that i just do not have the money to finsh CAR IS NOW RUNNING !!!!! asking 3800 obo the car needs to go i have no money to finish it and too many toys!!! its best offer guys i have most reciepts and info on the motor
Some of it:
84 Z28 body w/85-90 ground effects, Harwood 4" cowl, black 91-92 wheels, 3.42 10 bolt with auburn posi, sportlines, kyb's, energy suspension bushings in everything including motor mounts and trans, all stock suspension parts yet, new brakes hoses front and rear, new pads and shoes go with. Interior is black and from an 87 sport coupe. Drivers seat has a tiny hole in it, mint dash pad, grant wheel, 145 speedo, gutted no radio or heater/ac. Has an S10 manual box, sylvania performance headlights, newer stock radiator and hoses. Roller has a little rust needs paint. Nose is maroon and just put some nice no rust iroc doors on it wtih manual locks and windows so they dont match, (fronts are pretty new yet, BFG KDWS's), driver fender is dented, some body work and a spray bomb would really help the car. Also needs a light switch and battery needs to be rear mounted (no mount in the front corner) Car has grid tails. Id like to get $1000 for the roller.
TCI Competition TH350, 6" ts, reverse manual valvebody, has B&M torque arm mount, trans has no miles on it bought new in 05 i beleive and still havent gotten the car running yet. The paint started coming off so i stripped it back to the alum case, has a new tci dipstick tube..
Th350 short tail driveshaft, shortened from a 67 camaro, 3" steel new u joints
Art Carr Billet cover converter 4k stall, tighter converter, never got to use it either has 0 miles only behing motor for break in.
Hooker 2210's (From rtk434's car), collectors are slightly dented from a bumper wheel stand but he was still going high 8's with them,
motor is a 383 just freshened up by local machine shop new rings bearings everything is new in the motor no run time on it new comp cams hyd flat tappet cam 294h with the heads that are liste here on the motor should be about 11.5 to 1 compression
Pro Comp Motorsports heads 200cc/64cc 202/160's, pretty nice heads. comp guideplates and 1.255 single springs, 1.255 manley spring cups, locks and tit. retainers, liberty valves, arp screw in studs. Retainers and springs have about 1k miles rest of stuff is new.
Holley Strip dominator intake, single plane, painted black
45* swivel thermostat alum. housing
Holley 750DP carb, about 2 years old, just freshened up with quick fuel rebuilt kit, shaved choke tower, new russell line with white auto meter fuel pressure gauge, its ready to roll
Some of it:
84 Z28 body w/85-90 ground effects, Harwood 4" cowl, black 91-92 wheels, 3.42 10 bolt with auburn posi, sportlines, kyb's, energy suspension bushings in everything including motor mounts and trans, all stock suspension parts yet, new brakes hoses front and rear, new pads and shoes go with. Interior is black and from an 87 sport coupe. Drivers seat has a tiny hole in it, mint dash pad, grant wheel, 145 speedo, gutted no radio or heater/ac. Has an S10 manual box, sylvania performance headlights, newer stock radiator and hoses. Roller has a little rust needs paint. Nose is maroon and just put some nice no rust iroc doors on it wtih manual locks and windows so they dont match, (fronts are pretty new yet, BFG KDWS's), driver fender is dented, some body work and a spray bomb would really help the car. Also needs a light switch and battery needs to be rear mounted (no mount in the front corner) Car has grid tails. Id like to get $1000 for the roller.
TCI Competition TH350, 6" ts, reverse manual valvebody, has B&M torque arm mount, trans has no miles on it bought new in 05 i beleive and still havent gotten the car running yet. The paint started coming off so i stripped it back to the alum case, has a new tci dipstick tube..
Th350 short tail driveshaft, shortened from a 67 camaro, 3" steel new u joints
Art Carr Billet cover converter 4k stall, tighter converter, never got to use it either has 0 miles only behing motor for break in.
Hooker 2210's (From rtk434's car), collectors are slightly dented from a bumper wheel stand but he was still going high 8's with them,
motor is a 383 just freshened up by local machine shop new rings bearings everything is new in the motor no run time on it new comp cams hyd flat tappet cam 294h with the heads that are liste here on the motor should be about 11.5 to 1 compression
Pro Comp Motorsports heads 200cc/64cc 202/160's, pretty nice heads. comp guideplates and 1.255 single springs, 1.255 manley spring cups, locks and tit. retainers, liberty valves, arp screw in studs. Retainers and springs have about 1k miles rest of stuff is new.
Holley Strip dominator intake, single plane, painted black
45* swivel thermostat alum. housing
Holley 750DP carb, about 2 years old, just freshened up with quick fuel rebuilt kit, shaved choke tower, new russell line with white auto meter fuel pressure gauge, its ready to roll
Last edited by mean94lt1; 07-08-2009 at 11:56 AM.
04-28-2009, 11:49 AM
#2
TECH Junkie
iTrader: (47)
Join Date: Jul 2007
Location: Providence Village, TX
Posts: 3,105
Likes: 0
Received 0 Likes
on
0 Posts
can you send me some pics please carey.kriebel@yahoo.com my dad lives in Oley so if im interested maybe i can have him stop and look at it for me. thanks
05-04-2009, 04:23 PM
#5
Trending Topics
07-08-2009, 11:55 AM
#14
12 Second Club
Thread Starter
iTrader: (34)
Join Date: Dec 2006
Location: READING Pa
Posts: 712
Likes: 0
Received 0 Likes
on
0 Posts
got the car running over the weekend just needs an exhaust and headlight switch and your on your way....i have put a few pics of it up i painted teh nose now also
