wiring nightmare?
#21
GTO dash pffff too easy...ask me how I know. You should gut it all and build a custom race interior. Then build a turbo set-up for a few years and when you can't get it running right take it into a shop to finish it up for you
#23
Yeah but what I built is the power distribution for my PCM and body harness and cleans up my engine bay alot. I wouldn't LOL Lee, since you almost replaced your entire secondary air injection system and threw you money away. When it ended up being a crossed wire that only cost me a 2 feet of wire and 1 hour to diagnose/repair so you can ref your car for you "legal swap". Now that made me LOL.
Last edited by XpEdItIoUs; 08-20-2011 at 01:23 AM.
#24
What shop finished it for me? I built it and blew the stock motor and then went forged 370 and Ryne did a e85 speed density tune for me (which he did a badass job on) Still my car runs faster than your car with only 2 gears and my very first run (literally), since the car just got finished getting tuned the day before I havn't had much for the camaro since i have been building my SVO for some road racing, but anytime you want to go heads up let me know bro. It's funny how you and GMMGWS6 got all butt hurt cause you didn't get the responses you guys wanted from everyone. I always liked you and your bros cars since i think they look clean and have complement them. But if you want to talk **** just cause I answered the question to the thread title go right ahead i makes me lol I aint getting hurt
Last edited by XpEdItIoUs; 08-20-2011 at 01:39 AM.
#26
just saying.. lol
not everyone builds race cars for a living...
i worked on projects for some extra cash on the side.. despite the little free time that some of us have..
no one was expecting you to say tpi terror is the man of the hour.
i personally wouldn't get butt hurt if you were to say "the dash looks ugly and incomplete" but thank you for commenting on the thread.
What shop finished it for me? I built it and blew the stock motor and then went forged 370 and Ryne did a e85 speed density tune for me (which he did a badass job on) Still my car runs faster than your car with only 2 gears and my very first run (literally), since the car just got finished getting tuned the day before I havn't had much for the camaro since i have been building my SVO for some road racing, but anytime you want to go heads up let me know bro. It's funny how you and GMMGWS6 got all butt hurt cause you didn't get the responses you guys wanted from everyone, I always liked you and your bros cars since i think they look clean and have complement them. But if you want to talk **** just cause I answered the question to the thread title go right ahead i makes me lol I aint getting hurt
i worked on projects for some extra cash on the side.. despite the little free time that some of us have..
no one was expecting you to say tpi terror is the man of the hour.
i personally wouldn't get butt hurt if you were to say "the dash looks ugly and incomplete" but thank you for commenting on the thread.
#27
just saying.. lol
not everyone builds race cars for a living...
i worked on projects for some extra cash on the side.. despite the little free time that some of us have..
no one was expecting you to say tpi terror is the man of the hour.
i personally wouldn't get butt hurt if you were to say "the dash looks ugly and incomplete" but thank you for commenting on the thread.
not everyone builds race cars for a living...
i worked on projects for some extra cash on the side.. despite the little free time that some of us have..
no one was expecting you to say tpi terror is the man of the hour.
i personally wouldn't get butt hurt if you were to say "the dash looks ugly and incomplete" but thank you for commenting on the thread.
#28
I said cake and good job, But I know it's not cake not everyone can do it since it takes lots of brainstorming and creativity. Guess that's the same thing right? Sorry for giving my opinion since you did have a question mark on the thread title. I just don't like how they gap on the 3rd gens and i talk from experience. I'm done here i don't want your posse coming after me again and attacking me for no reason . But good job again it can be a pain in the *** but you got it done
#29
#30
What shop finished it for me? I built it and blew the stock motor and then went forged 370 and Ryne did a e85 speed density tune for me (which he did a badass job on) Still my car runs faster than your car with only 2 gears and my very first run (literally), since the car just got finished getting tuned the day before I havn't had much for the camaro since i have been building my SVO for some road racing, but anytime you want to go heads up let me know bro. It's funny how you and GMMGWS6 got all butt hurt cause you didn't get the responses you guys wanted from everyone. I always liked you and your bros cars since i think they look clean and have complement them. But if you want to talk **** just cause I answered the question to the thread title go right ahead i makes me lol I aint getting hurt
On a serious note, the majority of gear-heads(myself included) hate electrical spaghetti. I understand the schematics but don’t have the patience to sit there soldering, heat-wrapping etc. You on the other hand deserve some recognition for your accomplishments and skill, feel free to post on other people’s threads where you find them complaining about wiring nightmares
Just messing with you, nobody is attacking anyone. You just sounds kinda "douchie" (ie your reply to Zex). Cheer up Buttercup
#31
Struck a nerve there? Haha!! Some people are happy with a quick(non-race car) comfortable daily driver. I just thought it was funny how you were calling people out without even having a running car(for months). By your logic, sure lets race heads up brah, I’m building my boost motor as well should be ready for the standing mile in the near future.
On a serious note, the majority of gear-heads(myself included) hate electrical spaghetti. I understand the schematics but don’t have the patience to sit there soldering, heat-wrapping etc. You on the other hand deserve some recognition for your accomplishments and skill, feel free to post on other people’s threads where you find them complaining about wiring nightmares
Just messing with you, nobody is attacking anyone. You just sounds kinda "douchie" (ie your reply to Zex). Cheer up Buttercup
On a serious note, the majority of gear-heads(myself included) hate electrical spaghetti. I understand the schematics but don’t have the patience to sit there soldering, heat-wrapping etc. You on the other hand deserve some recognition for your accomplishments and skill, feel free to post on other people’s threads where you find them complaining about wiring nightmares
Just messing with you, nobody is attacking anyone. You just sounds kinda "douchie" (ie your reply to Zex). Cheer up Buttercup
#33