LS1 SPEED

iTrader: (22)

finally! no more getting cruising with dreams of front wheels

looks good

ndfrsd6

iTrader: (5)

they looks great

SmokedOutZ28

iTrader: (35)

Ah haha Now I won't embarrassed you when we cruise to the track

IWGF

iTrader: (6)

Hi. Holy dead thread batman.
Billet Specialties fronts only come in 17x7 bubba. (For the application you're talking about.)
17x11"s are made to fit our cars. You'll be alright.

IWGF

iTrader: (6)

Hi. Holy dead thread batman.
Billet Specialties fronts only come in 17x7 bubba. (For the application you're talking about.)
17x11"s are made to fit our cars. You'll be alright.

LS1 Sounds

iTrader: (11)

Incorrect, you can also get 17x9.5" BS SL fronts.

black_sheep454

iTrader: (9)

That looks sweet!

IWGF

iTrader: (6)

Good catch. I literally found that out ten minutes ago. Lol.

Black FormulaLs1

iTrader: (10)

i just want to know exactly how much it cost you for those 17x12 ..how much are the tires, what brand, where did you get them from..wht rear end you are running, how much it cost to cut it down..and for the love of god..WTF Exhaust are you running that tucks so NICELY to the bottom of the car!!??? hell PM if you want..i just need the info!!!

WVJEEPERS

iTrader: (3)

I got these wheels, they are flat. you cant get them in anything other than a mustang bolt pattern but since i had to get the rear axle narrowed over a foot(used a dana 60) i figured i would change the bolt pattern and be different.

Super Speed

iTrader: (8)

Looks good!

vdshenoy

Holy lip, batman!! WOW

SmokedOutZ28

iTrader: (35)

I don't remember the exact cost, I picked them up from a local buddy that works directly with AR Customs department, I do remember they cost more then a normal rear tt2. The tires are M/T ET streets Picked up from Speed Inc. I ordered the rear end from speed inc and had help with measuring and placement of the wheel by Larry @ speed Inc and Z8's, There were no extra charges involved with ordered a narrowed S60 as far as I know. The exhaust in the ground pic was Kooks 1-7/8th LTs, ORY, Hooker Catback with 3'' cutout, it was a great setup. I switched to a Custom ORY, Mufflex 4'' Catback with a 4'' Cutout seen in sig pic below. Hope I got them all!

vdshenoy

Came back to stare at your car again....

meine96ws6

iTrader: (4)

they look really good.. but, how much are those tires running you?

meine96ws6

iTrader: (4)

they look really good.. but, how much are those tires running you?

meine96ws6

iTrader: (4)

they look really good.. but, how much are those tires running you?

feelnlo

iTrader: (2)

SmokedOutZ28.....
You are my inspiration. Simply beautiful.

I may PM you with questions once I start my wheel/axle project which will be quite similar!

01SOMSS!

iTrader: (12)

can that lip be achived on 11" with? or maybe even a 12? i belive the ones on the blk car are 12,but stick out with the stock rear end right? i dont want to cut my rear end but want that lip.thanks guys!

Gordo78

iTrader: (3)

You aren't going to be able to get a lip bigger than the standard 17x11's and tuck them within the fenders without a narrowed rear....... Page two shows his custom wheels on a standard length rear, and as you can see, they stick out probably 2" on either side. I'm not sure what exactly you're asking otherwise.