guitarplayersteven

Does anyone on here have any pictures of their car with these rims and they are pushed out right by the fender? I hate how my wheels are tucked into the car. I was thinking about getting some wheel adapters. What do you guys think?

Fabian

iTrader: (5)

How much further out do you want them? You're not thinking like the way Mexicans pop em out are you?

lol

Turnin20s

iTrader: (12)

^^^^HAHAHAHAHA WTF look how stretched that tire is too LOL what were they doing???

Fabian

iTrader: (5)

Dude, here In New Mexico, it looks like everyone drives around on rollerskates. Watch, I'll see if I can snap some pictures this weekend. The pic above is actually not that bad.... you'll see

Turnin20s

iTrader: (12)

I hear ya man, they actually started doing it around here too, but I think they got made fun of too much and now they stick with spokes that actually fit under the cars and trucks

Its a sad time were living in LOL

Eskimo

iTrader: (9)

a 1/2" spacer would likely accomplish what you want, but you'd need longer studs to do so.

The rear 18x10.5's look better than the 17x9.5's (which I also have and don't like) IMO..

Turnin20s

iTrader: (12)

I agree

guitarplayersteven

Yea, I was looking into spacers, but I read a lot of bad things about them. I was looking more into wheel adapters, but would it look weird because my rear wheels dont have a lip?

guitarplayersteven

That is EXACLTY what I want...

99Bluz28

iTrader: (35)

What you really need IMO, is some wider tires on those wheels!
And lower your car out of the clouds!

MurderedOut

iTrader: (21)

spacers are fine as long as they are done properly, upgrade to 2.5" arp studs for any slip on spacer.

i would recommend 1/2" wheel spacers and 2.5" studs, but will cost around 190-200 shipped. check out jegs, they have what you need.

kilrbecars1

I have a set of 1 1/2" and a set of 1/4" if your interested. They were on my 2000 T/A Pm if your interested.

bene

iTrader: (16)

C5 ZO6 18x10.5 w/ 53mm offset.

guitarplayersteven

Thats what I have. My z06's have a 53mm offset. Don't you think it looks a little weird when the tires are tucked under the car or is just me?

bene

iTrader: (16)

If it stuck out more, you'd have to roll the fenders and do some modification to your fenders to bulge out more which defeats the purpose.

guitarplayersteven

Even an inch would require all that? I mean it looks like there is almost a 2 inch gap between the tire and the inner fender.

twitchtwice

iTrader: (12)

my oem zo6 stick out just as far as my stock ss, the main difference is that they are wider on the inside. i think they look great.

Wesmanw02

iTrader: (4)

What offset are your wheels??

The ones I want to get specify that a 56mm offset if correct for a 93-02 F-body...

Engine_HP

iTrader: (1)

how, all the wheels i see has eather 56 or 48 offset.

from where did u buy yours.

Wesmanw02

iTrader: (4)

Same here.

All the F-body wheels I've seen are 56mm offset. Seems to be the standard.