09-10 Spider version or 06-08 split spoke version and with OEM 325/30 / 275/35 tires . Ive seen a couple pics of them on a 94 , but there werent many angles . I dont need to know how to make them fit , Im good there . I love either style , I just need more convincing a flat face wheel this big looks appropriate on a 4th gen Camaro .

Take no offense , but NO replica pics please , the offsets on nearly all of them set the wheel to far in the fender for my tastes . While the OEM's appear to sit absolutely perfect on the car . Plus they are just to heavy for me to consider .

Ive scoured the net , and cant find any 06-10 GM OEM Z06 wheels on a 4th gen , figured Id give hear a shot even though its proabably pointless .

 

yeah im subscribing! id like to see this too. i know 12s will be a push in the rear, and i dont know the offests of the oem's, but i want to see some pics/writeups!!!

 

Looking to see how this goes...

 

Some nice shots of a twin turbo LT1 Z in GM hightech that have OEM Z06's. Looks nice

 

wow, yeah that is a sweet looking car. found the article. says they are oem's and they got them under there with no mini tubs, just lots of massaging...lol.

http://www.gmhightechperformance.com...aro/index.html

 

looks good.. i wanted them in black.. but ended up picking up mine cheap..

 

also- on the replicas. the offsets are the same on some if you look. i was looking around...

18x9.5--40mm offset
19x12--59mm offset

but im with you on the replicas, they seem to be 2-3lbs heavier....

 

That 94 in GMHTP is nice. I'd like some info on how they fit the Z06 rear brakes on a 9 inch.

 

That is because the OEM's require a spacer/adapter, meaning that you are automatically setting the offset yourself when you install them. Most people who get the Replica wheels can bolt them on and go, but their offsets tuck them in.

 

the oem rear c6 z06 wheel is 12" wide.not 10". has anyone done that?can you run an adapter with them?

 

I've since seen a 98 locally with oems . The offsets on the oem c6 zo6 does not require a spacer . Stock 17x9 rim has a 50 mm offset , a 19x12 oem rim has a 59 mm offset , which sticks the wheel out about 1.5 more inches than stock . The rim sat flush with fender lip as well as the 18x10 front . The base c6 wheels suck in so much because the offset us quite a bit higher than the z06 . Before it's asked , the local car had 325 mm stock z tires and it was just hammer tubed and fender lips rolled .

 

I have true OEM '08 C6 split spokes. 18/19 but my rear is an 19x10 or 10.5 not a 19x12. sorry. But pics anyways?

 

they look good!i have a set of black 08 z06 wheels i'm debating on putting on my 2000 ta and i don't know whether to throw them on there or not with a spacer/without?i took them to a dealership to sell,but they arent having any luck selling them,and my ta needs wheels

 

I really like those on that white Firebird TooFast has. Pretty good stance for some stockers.

 

Kore3.com sells the brackets for rear set up to run 98-02 rear brakes and flush strange or moser bearing ends . With or without parking brake . They just dont list it on their site , you have to order via phone or email . I was quoted 135 for the bracket not set up for a parking brake .

 

any one running these yet?

 

Those are terrible pictures in that magazine article. Wish they had some better ones.

 

i actually own a set of oem c6z wheels now, got them cheap. they look awesome except for the fact the tire sizes arent very good. i have 285/35 front...and 305/30 rears....

as far as fitment...awesome! i dont think they stick out too far, i trimmed up the bumpstop but didnt remove it....YET! but i will. and ill find some better tires someday...

 

I will be running these in the coming weeks. Hope they fit on my 00 ss drop top. I got em free!!!

 

I will post pics!