red281gt

iTrader: (6)

had couple of questions , I never had drag wheels on my camaro and my buddie has some dual bolt pattern draglights for ford and chevy. Just rims alone no spacers , washers , lugnuts ... What would i need to do to have them bolted on. I know you have to grind the calipers and stuff .. Im looking to get these things a.s.a.p .. I should be putting the nitrous kit on the car this week end and then right shortly the draglights to make some good passes down the HRP track ... If there is any pics of cars with draglights on also feal free to post them up!

ps: i DiD do search this time and found nothing! lol

Donohue96M6Z28

iTrader: (64)

Do you know the size/backspacing?

IWGF

iTrader: (6)

+1. Size and backspacing are necessary to tell you if you can make it work.

red281gt

iTrader: (6)

The back. R 15x10 with 7.5 backspacing wich would be fbod backspacing right? And front damn not sure ill ask tough

fire57

Here are some pic of mine, you will have to grind a lot, with the bk I know i did!

red281gt

iTrader: (6)

ok so the front are 3.75 or 1.75 ga damn it lol FML! lol i forgot and just seen it in a tex fawk! lol

IWGF

iTrader: (6)

15x10 w/ 7.5 BS will fit...

red281gt

iTrader: (6)

Front r 1.75 backspacing.. what spacers yah use??

Tommyv8

iTrader: (8)

15 x 3.5, 1.75 BS
I put 5/16" spacers on there (cheap universal ones) and they required no grinding. I did put on 2.5" ARP studs. I sold them before ever buying the rears.

red281gt

iTrader: (6)

Well those r just like his same backspacing ... thanks for the info on the spacers and studs really needed that

edzsilverss

iTrader: (4)

here is my pos

http://i945.photobucket.com/albums/a...s/IMG_4863.jpg

http://i945.photobucket.com/albums/a...s/IMG_4854.jpg

http://i945.photobucket.com/albums/a...s/IMG_4855.jpg

http://i945.photobucket.com/albums/a...s/IMG_4853.jpg

red281gt

iTrader: (6)

hey ed what did u have to do for the back? and where did u get the black decals for the fenders??

edzsilverss

iTrader: (4)

Nothing, just bolted them on. These are the ones I was telling you about when you were looking to trade. These are 16x8 and fit without doing a damn thing. Man I can't remeber where I got the hash mark stripes. Do a search and it will come up. Sorry bro that was about 4 years ago when I got them.

Tommyv8

iTrader: (8)

Does Weld make those? I didn't know you could get them in a 16x8 that will clear stock calipers.

ndfrsd6

iTrader: (5)

here are mine

prostreet67

lt1 one with draglights

edzsilverss

iTrader: (4)

They used to. They clear without doing **** but putting them on. You have to search for them though. The don't make new ones in this size. Don't know why, I broke both axles on 16" mt et-streets with these lol. I guess I need a 12 bolt. They are Weld Draglite XP's. They weight about 1 lb more than 15's but worth it not having to grind.

red281gt

iTrader: (6)

Going to try to pick up my set of draglights today 15x3.5 and 15x10 ..

red281gt

iTrader: (6)

I want to run some MT drs back , what size do I get want to get the widest for the 15x10 or atleast some 315

ndfrsd6

iTrader: (5)

they will fit a 325/50/15 but some modding will be required , i run 275/60/15 the 10 in wheel makes the tire look way bigger than its,
they just came out with a 295/55/15 but i cant find them everyone is out of stock...thats if you go with a 28 in tall tire ... 26 in is limited