Wheels & Tires Forged | Billet | Cast | Radials | Slicks

335/35/17s on stock height.

Thread Tools
 
Search this Thread
 
Old 07-30-2012 | 01:54 PM
  #41  
LPE 403's Avatar
TECH Addict
iTrader: (6)
 
Joined: Sep 2007
Posts: 2,256
Likes: 4
Default

Originally Posted by carlos64030
It doesn't matter if you get the axle perfectly centered... those tires are STILL gonna stick waaaaay the hell out like they are now. Don't even consider getting your rear-end narrowed when you can simply buy 2 new wheels with the correct offset.
^^^ exactly....

OP, give it up, they don't fit, they won't fit. The reason you have 2 1/2" inside is because you have that much outside
Old 07-30-2012 | 05:18 PM
  #42  
JUSTINSWS6's Avatar
TECH Fanatic
 
Joined: Jan 2012
Posts: 1,076
Likes: 0
Default

This dude dont get it smh
Old 08-24-2012 | 10:29 AM
  #43  
slt200mph's Avatar
TECH Senior Member
iTrader: (42)
 
Joined: Jul 2003
Posts: 7,067
Likes: 8
From: HOT'LANA, GAWJA
Default

This subject was beaten to death ten years ago. PO must have ridden the short bus. Everyone has told him the facts and he still doesn't understand. Dude even if they were free mismatched tires and wheels with the wrong offset will always look like crap. Sell them and start over. Nuff said.
Old 09-14-2012 | 06:05 PM
  #44  
Posi's Avatar
Staging Lane
 
Joined: Jul 2009
Posts: 69
Likes: 0
Default

Originally Posted by Mr.z/28
335s was all he had and for the buck why not.
Because 335's barely fit in the wheel well of these cars and when they do you have to hammer the sh*t out of the car to prevent rubbing.

The only reason you have backspacing is because the tire shop either used spacers or your offset is way off which also brings your center out too far and can become dangerous, especially with non-hubcentric wheels.

Sorry you are on a budget man... but doing all the research first would have ended up saving you money in the long run. If you want to keep the tires, you now need new wheels.
Old 09-14-2012 | 10:23 PM
  #45  
meine96ws6's Avatar
TECH Addict
iTrader: (4)
 
Joined: Feb 2009
Posts: 1,998
Likes: 0
From: Savannah, GA
Default

I ran the correct set of zr1 deep dish in 17 chrome, 315 nitto tire.. they fit / tucked perfect.



Quick Reply: 335/35/17s on stock height.



All times are GMT -5. The time now is 12:21 PM.