DHR Darren

iTrader: (1)

I just bought a 68 Camaro with a TTLS, ect and want to find a decent set of pro touring style wheels & tires for it for street use (That aren't $800 each!).

What are some sites, manufacturers, ect that you guys like to use?

I like the dished look and want a 10-12" rear wheel with a 4-5" backspace.

Prefer a titanium or black center and a polished rim.

Thanks for the help!

2JAWZ

iTrader: (1)

Im not 100% but anything thats 12in wide is probably gonna cost being that most of the affordable manufacturers don't produce them that wide from my own research. I have been searching high and low and if its not a Vette wheel then its exactly,800$ or higher. The usual suspects Weld,Billet Specialties, CCW, OZ etc. If you find any post back up because Im sure many others would like to find some. I just said screw it and Im putting back for a set I haven't seen yet on here*

DHR Darren

iTrader: (1)

Ya, the RT-S' are like $650 each too.

Here is what I would like to find.

2JAWZ

iTrader: (1)

Be sure to check the classifieds here, craigslist, ebay whatever. Those are nice and look awesome on 1st gens. If I find anything I will shoot you a message*

DHR Darren

iTrader: (1)

Thanks man!
I want to get these off of here!!!

alowerlevel

iTrader: (1)

Good luck, those forgelines on that car are $1200+ each http://www.forgeline.com/products/pe...y&pricing=1#q2

DHR Darren

iTrader: (1)

I won't buy the Forgelines on principal just because they are the flavor of the week.

kinglt-1

iTrader: (26)

Those wheels look good on there...

JakeFusion

iTrader: (7)

Billet Specialties Street Lites should be less than $400 a piece.

DHR Darren

iTrader: (1)

That's what I have now & want to get off of there.
The sunburst orange 68 is my car. Lol

TyCZ28

WELD S77's come in 18x10 and 18x11

TyCZ28

TSW Nurburgring are pretty inexpensive and offer an 18x10.5

DHR Darren

iTrader: (1)

I need a "dished" wheel for the car. I just can't do the "flat" wheels.

whiteheartbeat

iTrader: (4)

I found these for my car that look like a forged wheel and don't cost $800 a wheel but they only come 9.5". I don't think you'll find anything that's 12" unless it's a custom order. These are made by Rennen and it's the cast series.

DHR Darren

iTrader: (1)

That looks good!
I have a set of Sanders beadlocks coming for my drag radials and found these for some cheap street wheels.
http://m.ebay.com/itm/111704656351

2JAWZ

iTrader: (1)

Look through XXR wheels. They have somewhat the style, 10.5 wide and are an affordable wheel. Just finding one to fit may be the challenge!

BME

I have some CCW Classics that are 18x9 and 18x11 I'll sell you!? Shoot me a text at 405-248-1992. I just joined here to sell them actually, hence why I'm new, but am more than willing to prove that I have them and am not some scammer

BME

they're actually 18x11 and 18x13

DHR Darren

iTrader: (1)

Well after spacing off an important detail, I cannot run that style of wheel due to the 5/8" studs in the rear.

steveo346

iTrader: (18)

I like my Fikse mesh style wheels. You can get them in 18x12 I believe.