landstuhltaylor

iTrader: (6)

Bam




As the real Sam Strano you all know I don't give out my offsets, so don't bother asking. Proprietary information

smitty2919

What's that offset?


/troll....kidding, not kidding

landstuhltaylor

iTrader: (6)

You'll find out when BMR adds it to their catalog in a few weeks

RedDeadG8

iTrader: (3)

who cares about offsets. the tires stick out of the fenders like an 80's Camaro. talk to me about secret offsets when you manage to tuck them.

smitty2919

I heard Sam and BMR are best buds, you sell offsets to highest bidder?

79_T/A

iTrader: (1)

That rocks. The fake Sam Strano would give offsets, though.

You gonna slap some flares on that thing or just send it? Either way, it's awesome.

landstuhltaylor

iTrader: (6)

Have fun shredding Hoosiers on the inners then

Flares add weight. Back is going to come down another inch or so I just need to buy shorter springs. Front will come down another 3/4" for experiments

smitty2919

That's what my car looked like with about half the spring rate you run LOL

stp001

You will have to get a picture of you lifting BOTH inside tires in the slalom!

AnotherWs6

iTrader: (17)

+1. Those things don't look like they are gonna live a very happy life dangling underneath the wheel openings like that.

smitty2919

He lives life dangerously. I doubt that fender will kiss the tires...

79_T/A

iTrader: (1)

If you knew his suspension setup and the cars purpose, you would know that the tires will be just fine.

JD_AMG

Thats nasty.
What size wheels? How far past the fender to the tires actually stick out? Like 2in?

landstuhltaylor

iTrader: (6)

Rears will never come close to hitting at the current height. Will probably pull them a tad when I lower it though. Front fenders will most likely rub but **** it who cares they'll self clearance. Hammered the **** out of the inner fender up front to be safe, even more so that I had before.

landstuhltaylor

iTrader: (6)

18x12 square. Haven't measured but based off the old ones being pretty flush these should be poking 35mm or so each side.

landstuhltaylor

iTrader: (6)

Zero rubbing on the outside rear, although it is a bit on the inside. Will have to try a 5mm spacer just on the rear. Front rubs a bit on the plastic fender, plenty of clearance to the metal inner.

landstuhltaylor

iTrader: (6)

mOtOrHeAd MiKe

iTrader: (8)

That camber gain.... mmmm...

cancam99ss

iTrader: (8)

come on sam, you are better than that... let it be known i no longer have bar parts on my car.. so childish

landstuhltaylor

iTrader: (6)