protraxduner

I was planning on purchasing these in the next few months. I would like to go 18x10 all the way around. Has anyone done this?? Most I have seen have 18x10 only in the back. Maybe if someone gets bored they will try them in the front and see how they fit. If someone has done it what size tire are they using. TIA

FloridaZ

I know i'm not helping any but..imo opinion it's a waste. Unless of course your running auto-x. It's more tire and wheel to be pushing around. Go with the 9's up front with a 245 or a 255 tire. I have the 9's up front with 245's. If the wheel is turned just right they scrape a tiny bit. I think it may just be because the inner plastic part sags a bit on mine. Not sure what another inch on the wheel would be like. Either way you go it will look sweet.

REDWS6ROCKET

iTrader: (4)

The 10's will fit jus fine. They actually have a better offset than the 9's. Either way they will look badass.

ChoiceCam00

Hi there Tia, I wouldn't go with the 18/10s up front, just out back. I have the 18/9&18/10s with 275/35/18 BFG KDW NTs and they fit perfect. I'll be getting some DRs 295s for out back later. Here's my car http://www.photobucket.com/albums/a197/choicecam00/

Screamin_Z

iTrader: (2)

ummm, it's not Tia (as in somoneones name)...TIA means Thanks In Advance.

ChoiceCam00

Hi there Screamin_Z, thought that was your name as others put their name at the very end, sorry. Kevin

SilverSSGabe

iTrader: (4)

What offset do you have up front?

ChoiceCam00

Hi there SilverSSGabe, my front 18/9 is 25mm offset and 6" backspacing. The back is 18/10s with 41mm offset and 7&1/8" backspacing. As you can see, they fit perfect. Later, Kevin.

SilverSSGabe

iTrader: (4)

Thanks alot.