TURBO Z

iTrader: (3)

How Much Needs To Be Cut Off The Rear End To Run 15x10 With 5.5 B.s
With A 325/50/15 D.r. 4" Or More?

LS69TA

iTrader: (30)

Why are you going to run 5.5" bs? 325s can fit with minor fender mods and/or the BFH. Those rims will stick out almost 2" past the quarter panel.

TURBO Z

iTrader: (3)

I Know That, Thats Why I Need To Know How Much To Cut Off The Housing, 4" Total 5 Or 6 Or ????, To Make The 5.5 B.s. Work

tillery

iTrader: (4)

1.75 - 2 inches on each side

LS69TA

iTrader: (30)

Yea, probably 2".

wolfy

iTrader: (1)

sorry to highjack but...

you re saying if i go with 15x10's with 7.5 bs i can run 325/50's with normal mods?

LS69TA

iTrader: (30)

Yea, you may just have to do a little clearancing here and there to keep them from rubbing.

tillery

iTrader: (4)

I have seen a guy run this size of tire with 1.75 on each side. 2" will tuck it in a bit more. It was a trans am ,which has a little bigger wheel well too right? Also you still will need to roll the outer fender to keep from cutting the tires on a hard susp compresion.

LS69TA

iTrader: (30)

The T/As have a little more flare on the quarter panel, not sure if the wheel well is any bigger. It may just be because of the outer panel.

tektrans

iTrader: (23)

I used a 6.5" bs to fit mine.

LS69TA

iTrader: (30)

I had 6.5" as well. Looks better on the T/As to me.

wolfy

iTrader: (1)

so 6.5" BS is what i need to run with 15x10's and 325/50's ?

could somebody possibly post pics of both so i could see the difference?

-cam

bigdsz

iTrader: (1)

15X10's are supposed to have 7.5" backspace.

LS69TA

iTrader: (30)

Not mandatory. Mine with 6.5" looked perfect IMO. Camaros look better with 7.5". On my car, the tire was dead even with the top of the fender. I had 26" 275/50s though.

Derek98z

iTrader: (55)

look at my webpage. The pics with the Bogart SS's are 325/50's on a 15x10 with 7.5 bs

edit, here is a pic