1BadTA13

im lookin to get the 18 X 10.5 c6 zo6's for the back and the 17 X 9.5's in the front...i know the fronts will be no problem....but the backs i am a little worried about....i was wanting to run a 285-35 on the backs...will they fit without any fender rolling ....i also dont really wanna beat on my ride with a big hammer..insead of the BFH will wheel spacers work the same????...if so what size spacers?

1BadTA13

anyone???....come on i know you guys have em...gimme some input.

MadIceV8

iTrader: (12)

They will fit. Even if you have to do the BFH mod its only going to be a small area. 1/4" spacer should be enough.

Y2K Pewter SS

iTrader: (18)

I run 295/35/18s on my 18x10.5 with no problems at all. I didn't do the BFH mod either. You should be more than fine with 285s

LS1RedZ

iTrader: (19)

I run a 295/35/18 on my 18x10.5's also. I had very little trouble with them. I did a little bit of beating to the fender well, but other than that they are fine. I have the DMS springs and they dont rub on my fenders either.

mcG

iTrader: (1)

so for a 18x10.5 wheel with a 295/35/18 you might need a little BFH-ing but no spacers or anything else?

michaelg589

iTrader: (1)

as long as the offset is about +53mm. youll be fine. maybe a little BFH.

red87iroc

iTrader: (8)

I run them too, and on a 10.5" wheel with 58mm offset. No problems here. I might run a 1/8" spacer for comfort.

ls1mightymouse

I love my BFH mod!