What do you think of these on a Camaro?
What do you think of these on a Camaro? The car is a red Z28 lowered on Strano springs, how do you think these would look. I like them because they're light at just near 20lbs. I can't afford expensive wheels as I'm still in school.
I don't really care for the hoop on the outside of the center. It seems extraneous, and would likely make them harder to clean. Other than that, the general style is nice, though I think it may be better suited for a T/A.
Originally Posted by Texass683
whats the width on those. The widest i think i have seen those go for is 7 in. maybe 8
17x9.5
They make them in Hyper Black which I would really like but not in the size to fit an F-body.
12 Second Club
Joined: Sep 2005
Posts: 4,273
Likes: 0
From: Bucks County, Pa.
Are you sure on the bolt pattern being available for our cars?? I once asked the Enkei techs if they made anything for (4th gen) f bodies, and they answered an emphatic NO!!
BTW; they are an Evo "rally" wheel, and I like the style A LOT (as well as some of the other wheels out there [some Rays/Volk] that MOST on here would call a "ricer" wheel). But NONE OF THEM are made in our bolt patterns/offsets/etc.
BTW; they are an Evo "rally" wheel, and I like the style A LOT (as well as some of the other wheels out there [some Rays/Volk] that MOST on here would call a "ricer" wheel). But NONE OF THEM are made in our bolt patterns/offsets/etc.
Trending Topics
Originally Posted by dailydriver
Are you sure on the bolt pattern being available for our cars?? I once asked the Enkei techs if they made anything for (4th gen) f bodies, and they answered an emphatic NO!!
BTW; they are an Evo "rally" wheel, and I like the style A LOT (as well as some of the other wheels out there [some Rays/Volk] that MOST on here would call a "ricer" wheel). But NONE OF THEM are made in our bolt patterns/offsets/etc.
BTW; they are an Evo "rally" wheel, and I like the style A LOT (as well as some of the other wheels out there [some Rays/Volk] that MOST on here would call a "ricer" wheel). But NONE OF THEM are made in our bolt patterns/offsets/etc.
Yeah they're available, I checked Discount Tire Direct and the Enkei site and they're available.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo 12 Second Club
Joined: Sep 2005
Posts: 4,273
Likes: 0
From: Bucks County, Pa.
WOW!! You're right. Unless it's a misprint, that must be the ONLY wheel Enkei (or ANY of the "rice" wheel makers) makes to fit our rides. 
I'll bet you'd be the only one in an f body rolling on these!!! 
I'll bet you'd be the only one in an f body rolling on these!!! 
If you go to the Enkei website it lists the fitments and there is a size for 4th gen. 5x120.65 and up to a 10.5" wheel.
http://www.enkei.com/RacingSeriesSpecs/NTO3+M.html
http://www.enkei.com/RacingSeriesSpecs/NTO3+M.html
