Bogart wheels...we have the best setup for your car!
#21
LS1Tech Sponsor
iTrader: (4)
The only wheels that have a SFI tag on them is the Weld Magnums and Alumnastars in the 16" variety. If you call Weld they dont recommend them to be driven on the street.
I use Bogarts and other high end brands on my customers cars. The Bogart fits and is built excatly by the measurements I order. The others dont give you that kind of service.
I use Bogarts and other high end brands on my customers cars. The Bogart fits and is built excatly by the measurements I order. The others dont give you that kind of service.
#22
Launching!
iTrader: (1)
Join Date: Nov 2001
Location: Chi-Town
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
So then That means you Don't have the Best Setup like you stated.
And referring me to Jugs or Summit?? Any loss of weight that is removed is a benefit and Gain over stock, The welds, Billets, And the Convo's are all less weight then stock. Also with the diffrence in Tire weight it all adds up. Also in your First post You Made mention of 5lbs rotational mass at every corner, Well if the Billets are 1.7 lbs heavier on the front wheels, how does that equal to 10lbs each side, Cause depending on what tire you go with, they are usually also less weight then stock, that is rotational mass correct????? so i know its far less then 20 lbs on the front end. that to me is Misinformation.
Sfi Rating?? I guess it Means NOTHING to all the racing orginazitions out there. I mean It is put into place to set a Standard, that pretty much all products are equaled upon.
Thanks For making Sure were all Informed about our Best Solution.
And referring me to Jugs or Summit?? Any loss of weight that is removed is a benefit and Gain over stock, The welds, Billets, And the Convo's are all less weight then stock. Also with the diffrence in Tire weight it all adds up. Also in your First post You Made mention of 5lbs rotational mass at every corner, Well if the Billets are 1.7 lbs heavier on the front wheels, how does that equal to 10lbs each side, Cause depending on what tire you go with, they are usually also less weight then stock, that is rotational mass correct????? so i know its far less then 20 lbs on the front end. that to me is Misinformation.
Sfi Rating?? I guess it Means NOTHING to all the racing orginazitions out there. I mean It is put into place to set a Standard, that pretty much all products are equaled upon.
Thanks For making Sure were all Informed about our Best Solution.
#23
Launching!
iTrader: (1)
Join Date: Nov 2001
Location: Chi-Town
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Nine Ball
Elite Non-Sponsor Auto, please give it a rest or you could suddenly find that your account no longer works properly.
Thanks!
Thanks!
Thats ODD.
#24
TECH Apprentice
iTrader: (2)
Join Date: Aug 2004
Location: Chicago
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Elite Custom Auto
Tony Where Have i Acted like a SPONSOR??? Where have i mentioned Anything i am looking to sell or push??? I cant ask some Questions About what Someone is Claiming, when we know there are otheres out there????
Thats ODD.
Thats ODD.
#25
LS1Tech Co-Founder
iTrader: (38)
Okay, I'll be less polite this time. IF YOU REPLY ONE MORE TIME IN THIS THREAD, YOU WILL RECEIVE A FREE VACATION FROM THE SITE.
Questioning/discussing is one thing, YOU ARE HARASSING and being a wise ***. It isn't what you say, it is how you say it.
Before hitting the "reply" button, I suggest you read the first sentence in this reply.
Questioning/discussing is one thing, YOU ARE HARASSING and being a wise ***. It isn't what you say, it is how you say it.
Before hitting the "reply" button, I suggest you read the first sentence in this reply.
#26
TECH Apprentice
iTrader: (2)
Join Date: Aug 2004
Location: Chicago
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
Im neutral in the situation, I was just wondering how he was "harassing"? IMHO he was simply bringing up valid questions and I didn't know you can get banned for having an opinion on a public forum?
#27
LS1Tech Co-Founder
iTrader: (38)
Mr "neutral"
Please read replies #16 and #22 and tell me if those were questions being maturely asked or if someone was being a wise ***. Like I said above, it is not WHAT you say, it is HOW you say it. Being a wise *** and trying to start arguments is considered HARASSMENT.
Now, drop the subject please.
Please read replies #16 and #22 and tell me if those were questions being maturely asked or if someone was being a wise ***. Like I said above, it is not WHAT you say, it is HOW you say it. Being a wise *** and trying to start arguments is considered HARASSMENT.
Now, drop the subject please.
#28
12 Second Club
iTrader: (5)
Join Date: May 2004
Location: Chatsworth Ga
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
SJM,
Is great to work with. I'm very satisfied with my order and fitment.
Steve,
Sorry I havn't sent the finished pics yet, but you can see a couple in this thread https://ls1tech.com/forums/showthrea...=775802&page=2
Thanks again
Is great to work with. I'm very satisfied with my order and fitment.
Steve,
Sorry I havn't sent the finished pics yet, but you can see a couple in this thread https://ls1tech.com/forums/showthrea...=775802&page=2
Thanks again
#31
LS1Tech Sponsor
iTrader: (65)
can u email me some prices to superman99ta@comcast.net for my 99 trans am. havent decided on specific model yet but want some prices in full polished 15s with 3.5s up front and 10s out back. also same specs but 16s. thanks.
__________________
Featuring 6 different turbo kits for your F-body!
Check us out on Facebook at: www.facebook.com/HuronSpeed
Featuring 6 different turbo kits for your F-body!
Check us out on Facebook at: www.facebook.com/HuronSpeed
#32
Originally Posted by SLowETz
Bolted RT Drags here-
Great wheels. Are as described. Fit/finish is impecable.
Will be purchasing ANOTHER set(Bolted RR/RT's)for the radials from you soon-
Btw Steve, these are the centers you did for me last Spring w/out the spacer. Tuck perfect/no inboard issues
Great wheels. Are as described. Fit/finish is impecable.
Will be purchasing ANOTHER set(Bolted RR/RT's)for the radials from you soon-
Btw Steve, these are the centers you did for me last Spring w/out the spacer. Tuck perfect/no inboard issues
#33
Originally Posted by Superman09
can u email me some prices to superman99ta@comcast.net for my 99 trans am. havent decided on specific model yet but want some prices in full polished 15s with 3.5s up front and 10s out back. also same specs but 16s. thanks.
Filling out this form simplifies the whole process for everyone. If you do not want to fill out the form, please give us a call whereas I can discuss your options.
#36
LS1Tech Sponsor
iTrader: (65)
Ok thanks, i couldnt access that page earlier. I just submitted a form. Let me know, thanks!
__________________
Featuring 6 different turbo kits for your F-body!
Check us out on Facebook at: www.facebook.com/HuronSpeed
Featuring 6 different turbo kits for your F-body!
Check us out on Facebook at: www.facebook.com/HuronSpeed
#39
9 Second Club
iTrader: (17)
Join Date: Nov 2002
Location: New Braunfels ,Tx
Posts: 4,997
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MADMAN
The only wheels that have a SFI tag on them is the Weld Magnums and Alumnastars in the 16" variety. If you call Weld they dont recommend them to be driven on the street.
I use Bogarts and other high end brands on my customers cars. The Bogart fits and is built excatly by the measurements I order. The others dont give you that kind of service.
I use Bogarts and other high end brands on my customers cars. The Bogart fits and is built excatly by the measurements I order. The others dont give you that kind of service.
I totally agree. I called other vendors and no one would do an anodized center racing wheel for me. One call to Steve and a patient wait and this is what you get Ill have them mounted this next week
#40
9 Second Club
iTrader: (17)
Join Date: Nov 2002
Location: New Braunfels ,Tx
Posts: 4,997
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Getav8
Bogart RT RR 17x6 front and 17x11 back.
(Steve feel free to use these photo's just pm me links to where ever they are posted.)
(Steve feel free to use these photo's just pm me links to where ever they are posted.)