greg welds on
Trending Topics
#8
10 Second Club
iTrader: (1)
Join Date: Sep 2007
Location: In Uranus!
Posts: 1,500
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
How did they fit? I just ordered a set of these wheels front and back with the same front tires and the Hoosier 28" tall Dr's in the rear. I ordered mine from Summit racing. The order said 4.50/4.75" rims, front was 1.75" back spacing and the back was 5.5" back spacing. I guess they are made to fit Ford or Chevy.. Did you have to do any grinding on the calipers?
#11
11 Second Club
Thread Starter
iTrader: (9)
Join Date: Mar 2007
Location: Avondale, AZ
Posts: 1,016
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
just for the heads up you will need longer studs. The greg weld studs are 2 and 1/4" long and your stock studes only go about 1 1/4" s in. Therefore it does not ender the hex portion of the studs. I am going to just get arp 2.5's should be enough
#18
11 Second Club
Thread Starter
iTrader: (9)
Join Date: Mar 2007
Location: Avondale, AZ
Posts: 1,016
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
no grinding just put them on and everything works good. Will need longer studs though to pass tech. Tires are reg sportmans that fit 3.5" rims and they are 26" tall. I needed dot tires for the class i run