Street Lite fronts Available in 2 weeks.
Street Lite fronts Available in 2 weeks. Already test fitted a front on a car and they work. A little grinding is required on the top of the caliper for them to work. Basically just some cleanup of the casting. Larry from speed inc can chime in for clarification as he Did the grinding on the caliper. Im sure with some worn down pads no grinding will be needed.
as you can see by the caliper before and after pics minimal grinding was done and no spacers where used
as Jason mentioned a car with worn pads/ rotors could probably get away with no grinding, but this cars brakes have low mileage
great wheel and great fit
I can't wait to get the 17's on my Bro's Bu.
as Jason mentioned a car with worn pads/ rotors could probably get away with no grinding, but this cars brakes have low mileage
great wheel and great fit
I can't wait to get the 17's on my Bro's Bu.
Sweet! That looks so badass, nice work Billet Specialties!!
What are we lookin at here? 15x3.5 fronts/15x10 rears with a MT sportsman 1573 and a MT 28" et drag rear? What series rear is that? 'S' type? Got a set price yet for whats pictured above with lugs before shipping?
What are we lookin at here? 15x3.5 fronts/15x10 rears with a MT sportsman 1573 and a MT 28" et drag rear? What series rear is that? 'S' type? Got a set price yet for whats pictured above with lugs before shipping?
Nothing is needed for the rear to fit. Just bolt on and go.(well once your tires are mounted).
The fronts As you can see require some minimal grinding. which also give you some time to paint your calipers to make your new wheels stand out some more.
fronts are a 15x4 and the rear is a 15x10.
pricing with wheels, lugs and valve stems is 1100.00 plus shipping. ( ls1 tech Special )
The fronts As you can see require some minimal grinding. which also give you some time to paint your calipers to make your new wheels stand out some more.
fronts are a 15x4 and the rear is a 15x10.
pricing with wheels, lugs and valve stems is 1100.00 plus shipping. ( ls1 tech Special )
TECH Senior Member
iTrader: (10)
Joined: May 2005
Posts: 5,353
Likes: 2
From: Bossier city,LA barksdale AFB
hell you could just run a small spacer on front and not grand at all 
Not a big deal to run a small spacer on the front! That complete set deal looks good! I Got a friend in hawaii lrry93 interested you may get pm from him
Not a big deal to run a small spacer on the front! That complete set deal looks good! I Got a friend in hawaii lrry93 interested you may get pm from him Last edited by SIC LSX; Aug 27, 2008 at 02:36 PM.
Trending Topics
yes a small spacer would solve any grinding issues, but we wanted the wheel inside every bit we could on this car
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
I personaly dont care lol 
