HUMount
Thread Starter
11 Second Club
iTrader: (103)
Joined: Aug 2005
Posts: 2,633
Likes: 1
From: South of West Point Iowa
Lots of HUMount Pictures (install) 56K slow-slow Not sure how many of you have seen these, but I like it alot!
Anyway, I've ordered one this past week and can't get ahold of the company (www.humount.com) either e-mail or phone. They run about 75 bucks shipped w/customized lettering. Starting to get concerned. Anyone else order recently and have no problems or any problems? Thanks!
Duff
Anyway, I've ordered one this past week and can't get ahold of the company (www.humount.com) either e-mail or phone. They run about 75 bucks shipped w/customized lettering. Starting to get concerned. Anyone else order recently and have no problems or any problems? Thanks!
Duff
Last edited by Duffster; Apr 14, 2006 at 07:54 PM.
i ordered mine alittle over a year ago. he took awhile to respond but said he was out of town. i believe it is jsut a private business so id just be patient. it took a few weeks to get mine, but i cant complain. nice piece and lots of compliments
Thread Starter
11 Second Club
iTrader: (103)
Joined: Aug 2005
Posts: 2,633
Likes: 1
From: South of West Point Iowa
Oddly enough, got a phone call about 20 minutes ago for my unit . . .I said UNIT. . .
Anyway, he's building it tomorrow and shipping Wednesday most likely. Thanks!
Duff
Anyway, he's building it tomorrow and shipping Wednesday most likely. Thanks!
Duff
One thing you need to do...paint black or wrap electrical tape around the white plastic piece that gets "lit" up...that will prevent any other light from coming through, like on mine before I fixed it.
I also only remember paying $45 back in December
Trending Topics
Thread Starter
11 Second Club
iTrader: (103)
Joined: Aug 2005
Posts: 2,633
Likes: 1
From: South of West Point Iowa
I requested blue (+15) customized (+10) lettering to simply read "C A M A R O" to match EXACTLY the rear panels on the car (without the little tabs holding the extra parts of the As or O. . .
He said it was a PITA, but thats why they charge extra right?
He said it was a PITA, but thats why they charge extra right?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by Duffster
I requested blue (+15) customized (+10) lettering to simply read "C A M A R O" to match EXACTLY the rear panels on the car (without the little tabs holding the extra parts of the As or O. . .
He said it was a PITA, but thats why they charge extra right?
He said it was a PITA, but thats why they charge extra right?
how easy are these to instal?? and the lighted ones, did you get the led bar form them or did you have it done another place?? ive been thinking about these as i have a new headunit sitting in my garage waiting to go in i just didnt want the ugly plastic that most companys have as an install kit, this is a much beter option
TECH Apprentice
Joined: Nov 2004
Posts: 300
Likes: 0
From: Kitchener, Ontario, Canada
I have pics of the aluminum one here. http://richw.cz28.com/photo4.html
Very easy to install. I spliced the power and ground to the ilumination and ground wires on my deck. Now the light comes on with the headlights. I also noticed the blue "bar" of light coming from above the deck like in the pic above. I took the mount back out and glued a piece of carpet from my amp rack to the plastic mount above the opening. Problem solved. The only issue I had with the install was the RCA cables coming out of the back of the deck were hitting the back wall of the opening and it wouldnt go in all the way. I was preparing for a battle to get it to fit but it went in without a problem the second time I put it in.
Very easy to install. I spliced the power and ground to the ilumination and ground wires on my deck. Now the light comes on with the headlights. I also noticed the blue "bar" of light coming from above the deck like in the pic above. I took the mount back out and glued a piece of carpet from my amp rack to the plastic mount above the opening. Problem solved. The only issue I had with the install was the RCA cables coming out of the back of the deck were hitting the back wall of the opening and it wouldnt go in all the way. I was preparing for a battle to get it to fit but it went in without a problem the second time I put it in.
Thread Starter
11 Second Club
iTrader: (103)
Joined: Aug 2005
Posts: 2,633
Likes: 1
From: South of West Point Iowa
I'll definitely get pics posted. Requested lettering like the one above that doesn't have the bars in the As and O (the SLP modeled one)
and got notification yesterday from HUMount it's en route. . .
and as for CVN70. . . .did my 4 full years there. . .
Go hug Dallas (RE Div)... He's feeling down.
Duff
and got notification yesterday from HUMount it's en route. . .
and as for CVN70. . . .did my 4 full years there. . .
Go hug Dallas (RE Div)... He's feeling down.
Duff
