Amp question
Assuming your amp is 2-ohm stable and the aftermarket speakers are 4-ohm, you could wire the two door speakers in parallel to produce a 2-ohm load for the amp. But you will lose stereo separation in the front - a very undesirable result.
Beside, what makes you think the factory amp is going? That would be extremely unusual - the Monsoon amp is fairly reliable. I would look elsewhere for sound problems before suspecting the amp.
Remember all the speakers are after market.
Trending Topics
Now turn on the radio and see if the noise is still there or not. If the noise is still present then you know the factory amp wasn't the problem.
The Best V8 Stories One Small Block at Time





