LS1TECH - Camaro and Firebird Forum Discussion
0 2022/04/12 08:36:56
0 2022/04/12 08:37:07
The only picture of the engine itself. Driver's side head.
The only picture of the engine itself. Driver's side head.
0 2022/04/12 08:37:18
0 2022/04/12 12:07:22
To replace the higher flowing, Aeromotive 340 pump.
To replace the higher flowing, Aeromotive 340 pump.
0 2022/04/12 12:32:02
I would've just used this included, Aeromotive 340lph pump but I read that the Wix 33737 filter/regulator can't handle that much volume.
I would've just used this included, Aeromotive 340lph pump but I read that the Wix 33737 filter/regulator can't handle that much volume.
0 2022/04/12 12:32:12
0 2023/01/15 06:18:16
0 2023/01/15 06:25:15
0 2023/02/05 06:04:26
0 2023/02/05 06:05:07
0 2023/02/05 06:05:20
0 2023/11/16 20:04:15
This picture shows the actual tailpipes but there are two more intermediate pipes that go over the rear axle.
This picture shows the actual tailpipes but there are two more intermediate pipes that go over the rear axle.
0 2024/01/15 14:09:55
I grabbed this fistful of wiring from behind the stereo. It was time to get real serious with it I noticed that this fistful of wiring was only connected to the car by one wire shown in the next picture!
I grabbed this fistful of wiring from behind the stereo. It was time to get real serious with it I noticed that this fistful of wiring was only connected to the car by one wire shown in the next picture!
0 2024/04/14 15:54:30
Only this one wire?!?!? Something else isn't connected!
Only this one wire?!?!? Something else isn't connected!
0 2024/04/14 15:56:17
0 2024/04/14 15:57:10
0 2024/04/14 17:47:57
The shiny rubber seal right up against the radiator fins is black silicone rubber tubing. I purchased 10' of it from a seller on Amazon. It's very soft and pliable and stands up to high temperatures. Using a box cutter, I split the tubing from one side to the middle. This allowed be to place the cut tubing over the fan shroud plastic edge creating a nice seal. It was only 10 bucks for 10' of tubing.
The shiny rubber seal right up against the radiator fins is black silicone rubber tubing. I purchased 10' of it from a seller on Amazon. It's very soft and pliable and stands up to high temperatures. Using a box cutter, I split the tubing from one side to the middle. This allowed be to place the cut tubing over the fan shroud plastic edge creating a nice seal. It was only 10 bucks for 10' of tubing.
0 2024/04/14 17:48:12
Like everything else, they're china made.
Like everything else, they're china made.
0 2024/06/11 06:05:36
0 2024/12/11 17:11:50
1 2025/03/26 07:21:36
0 2025/03/26 07:30:21
0 2025/03/26 07:30:33
0 2025/03/26 07:30:46
0 2025/07/26 19:10:23
0 2025/07/26 19:10:32
0 2026/03/14 10:07:56
Purchased from Hawks Motorsports
Purchased from Hawks Motorsports
0 2026/03/14 10:13:13
0 2026/03/14 10:13:50
0 2026/03/14 19:25:27
0 2026/03/14 19:28:34
0 2026/03/14 19:29:00
You can see the clutch rod in the center of the picture between the pedals. It's easy to notice the angle and that it's not perpendicular to the pin on the side of the pedal.
You can see the clutch rod in the center of the picture between the pedals. It's easy to notice the angle and that it's not perpendicular to the pin on the side of the pedal.
0 2026/05/08 11:00:20
0 2026/05/08 11:01:55
You can see the clutch MC rod in the center of the picture. It's easy to notice that it is not perpendicular to the mounting pin sticking out of the side of the clutch pedal. Pushing on the clutch pedal puts a lot of side force on that small locking clip.
You can see the clutch MC rod in the center of the picture. It's easy to notice that it is not perpendicular to the mounting pin sticking out of the side of the clutch pedal. Pushing on the clutch pedal puts a lot of side force on that small locking clip.
0 2026/05/08 11:02:06