Best Supercharger for 02 WS6??
#1
Best Supercharger for 02 WS6??
Hello everybody,
this is my first thread so im gona get right into it, I just bought a 02 black on black Trans am with only 21K miles on it, im looking to do some serious mods to the car, i want to put a supercharger on it but i cant seem to find one, i called Vortech and they said they dont make them anymore for F-bodies so he told me to contact RMCR but they dont answer there e-mails or phone...so im stuck
can anybody advise where i can get the best supercharger for my car?
your opionios will very much appreicated, thank you.
this is my first thread so im gona get right into it, I just bought a 02 black on black Trans am with only 21K miles on it, im looking to do some serious mods to the car, i want to put a supercharger on it but i cant seem to find one, i called Vortech and they said they dont make them anymore for F-bodies so he told me to contact RMCR but they dont answer there e-mails or phone...so im stuck
can anybody advise where i can get the best supercharger for my car?
your opionios will very much appreicated, thank you.
Last edited by BlackDevilWS6; 07-28-2011 at 01:50 AM.
#3
TECH Junkie
iTrader: (18)
Join Date: Aug 2005
Location: Amsterdam Ny, the good part
Posts: 3,400
Likes: 0
Received 67 Likes
on
53 Posts
procharger , bob from brutespeed is on here . Go with the d1 kti with a 8 rib setup . Or if you want something that will blow your motor if you want and then you have to build something up go with the f1 .
Bob at brutespeed is your best bet .
Bob at brutespeed is your best bet .
#4
LS1Tech Sponsor
iTrader: (16)
To the OP, here is the kit I would go with. http://shop.brutespeed.com/ATI-1GJ20...-Speed-Kit.htm
Let me know if you have any questions. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#5
Hey, thanks for coming through, the procharger looks really good but the only problem i have is that i can't remove the front plates from my car as its illegal in this country.. and by the looks of how the procharger is installed both the front plates and the fog lights have to go, so i dont think the procharger is a good option for me unless there is a different type i can purchase that can simply be installed in the engine without removing the fog lights or the liscense plate??
do i have any other options for superchargers/prochargers?
do i have any other options for superchargers/prochargers?
#6
TECH Junkie
iTrader: (18)
Join Date: Aug 2005
Location: Amsterdam Ny, the good part
Posts: 3,400
Likes: 0
Received 67 Likes
on
53 Posts
The Procharger is fine. You not reading or looking. The fmic is an upgrade. It comes with twin ics that mount by the driving lights/turn signals. You can keep your front plate and fogs. It's only when you go big hp abd upgrade to the fmic where you have to lose the fogs
#7
LS1Tech Sponsor
iTrader: (16)
The Procharger is fine. You not reading or looking. The fmic is an upgrade. It comes with twin ics that mount by the driving lights/turn signals. You can keep your front plate and fogs. It's only when you go big hp abd upgrade to the fmic where you have to lose the fogs
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
Trending Topics
#8
Your right i did not read it carefully,thanks for all the help,im a bit of a newbie incase you havent noticed, i'll be contacting bob about the procharger soon, would you recommend any other MODS besides the procharger? i heard theres no use of getting a K&N air intake if im going to be installing a procharger as it comes with its own intake, is that correct? im also thinking about getting the borla cat-back, i need some opinions on what to do, but mainly i want my car to reach over 700 HP
#9
TECH Junkie
iTrader: (18)
Join Date: Aug 2005
Location: Amsterdam Ny, the good part
Posts: 3,400
Likes: 0
Received 67 Likes
on
53 Posts
You really are a newb. You want 700hp and your asking about a catback. Your gonna need headers. Heads. Cam your sc. Big injectors prolly 80lb. Built rear end ford 9. Built up transmission. New clutch flywheel setup. Then wait till the engine blows. But your in way over your head. Get some good headers. Kooks. Either 1 7/8 or 2 inch primary and do the sc setup
Also I forgot. Fast intake. Fast tb and fast rails
Your better off buying a totally done car.
Also I forgot. Fast intake. Fast tb and fast rails
Your better off buying a totally done car.
#10
if a stock WS6 is 325 HP and i only add a procharger, LT headers, full cat-back, cold air intake, how much HP would my car be? i only want the major mods that most people get.
#12
LS1Tech Sponsor
iTrader: (16)
lol..that honestly made me laugh, i mentioned that cat-back because its the first thing im gona get, i dont want to do every single mod there possibly is to my car, how much HP can a procharger give? i dont want to blow my engine like you said, i just want to make my car a very strong car
if a stock WS6 is 325 HP and i only add a procharger, LT headers, full cat-back, cold air intake, how much HP would my car be? i only want the major mods that most people get.
if a stock WS6 is 325 HP and i only add a procharger, LT headers, full cat-back, cold air intake, how much HP would my car be? i only want the major mods that most people get.
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#13
#14
TECH Regular
iTrader: (1)
Hey, thanks for coming through, the procharger looks really good but the only problem i have is that i can't remove the front plates from my car as its illegal in this country.. and by the looks of how the procharger is installed both the front plates and the fog lights have to go, so i dont think the procharger is a good option for me unless there is a different type i can purchase that can simply be installed in the engine without removing the fog lights or the liscense plate??
do i have any other options for superchargers/prochargers?
do i have any other options for superchargers/prochargers?
Where are you located in Canada ?
#15
Thanks, I appreciate it!
To the OP, here is the kit I would go with. http://shop.brutespeed.com/ATI-1GJ20...-Speed-Kit.htm
Let me know if you have any questions. Bob
To the OP, here is the kit I would go with. http://shop.brutespeed.com/ATI-1GJ20...-Speed-Kit.htm
Let me know if you have any questions. Bob
Last edited by S1LV3R; 08-02-2011 at 04:39 PM.
#16
It should get you into the 500 rwhp range. The cold air intake is not needed as it is part of the ProCharger system. I would add subframe connectors, as these cars really need them to keep the chassis structure solid when adding a lot of power. http://shop.brutespeed.com/BMR-SFC00...BMR-SFC001.htm Bob
please advise if theres any additional items i should get along with the procharger.. like the subframe connectors that you mentioned so i can avoid any problems i might face in the future, PM me with this info plz and tell me what is the best way to contact you for purchasing..etc etc
#18
11 Second Club
iTrader: (1)
Join Date: Mar 2010
Location: Mooresville NC
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
lol..that honestly made me laugh, i mentioned that cat-back because its the first thing im gona get, i dont want to do every single mod there possibly is to my car, how much HP can a procharger give? i dont want to blow my engine like you said, i just want to make my car a very strong car
if a stock WS6 is 325 HP and i only add a procharger, LT headers, full cat-back, cold air intake, how much HP would my car be? i only want the major mods that most people get.
if a stock WS6 is 325 HP and i only add a procharger, LT headers, full cat-back, cold air intake, how much HP would my car be? i only want the major mods that most people get.