Maxjon97

Got an air lid and bellow for a Christmas gift and am super stoked but I have a question. Where my finger is pointing it has a rubber hose that connects to that 90 then goes to another 90 my car has no where to hook this hose. Is this hose important or can I plug the hole. Thanks in advance

scotty2000ss

iTrader: (2)

What vehicle is it on?

Maxjon97

2000 Camaro SS

Empatho

iTrader: (16)

That there is for the AIR system, since your car is a 2000 you can just plug the hole and not worry about it.

Maxjon97

Sweet Thanks Empatho!

scotty2000ss

iTrader: (2)

Plug the hole if the air system is currently deleted. If your not sure if it's deleted I'd do a google image search.

Maxjon97

Thanks Scotty it's deleted already.

02SSFregolle

iTrader: (4)

Since you asked that question does it matter for other years? Just asking because I'm planning on doing the delete for my 02 SS

redbird555

iTrader: (14)

02 has the same style air system so it gets pulled out then the hole gets plugged

02SSFregolle

iTrader: (4)

Just asking since to my knowledge all the 98-02 have the same lid not sure if they all have the same air system though. You know if they sell a delete kit or are we just going to a parts store and getting misc sizes

redbird555

iTrader: (14)

they sell an air blockoff kit. the 98-99 air system was different it didnt have the junction block on the back of the heads. The block off plates for the manifolds can be bought at a sponsor but I just made my own when I did it. I got a rubber plug at home depot (brought the lid with me)

02SSFregolle

iTrader: (4)

Is that all that has to be blocked off? Just the lid/back of the intake manifold/plates for manofold or headers

idahoz28

iTrader: (2)

Pictures are long gone from this thread but if you read through it you will probably be able to figure it out...... https://ls1tech.com/forums/generatio...oval-pics.html