coolant steam tube?
Trending Topics
#10
My radiator had a bung in it also so I followed the upper rad hose and a little channel between the rad and support to the bung fitting. It is good to get it to the highest point to make sure the air gets out of the engine.
#12
steam vent
Thats what I am going to do too. I plan on trying to epoxy some clips to hold the steam on the bottom of either the upper hose or intake tube. Going for invisable
#13
I thought of using some large diameter heat shrink that would go over the rad and steam hose to conceal it, but didn't try it. Or even some of that woven hose protection material would work too.