My 1963 Ford Econoline 4.8/6L80E build
#145
Launching!
Thread Starter
I started to extend the factory RX8 rear package tray to the rear doors and to the sides. I am using my wire frame technique which will be wrapped in fleece and then coated with resin.
This will give a nice clean look when looking in from the back windows.
This will give a nice clean look when looking in from the back windows.
Last edited by trozfan; 06-02-2016 at 03:26 PM.
#148
Launching!
Thread Starter
#155
Hey this is a total hijack so I understand if you ignore - no problemo... but I have a guy that wants to trade me a 61 Econoline pickup as part of a trade & cash thing and all I would do is want to flip the Econoline. But I know absolutely nothing about these trucks so I would welcome any guidance. This one has the curved rear 1/4 glass and a broken 3rd gear of the 3 on the tree.
Anyway sorry for the distraction and trozfan fantastic build! I am not worthy!
Anyway sorry for the distraction and trozfan fantastic build! I am not worthy!
#157
Launching!
Thread Starter
Hey this is a total hijack so I understand if you ignore - no problemo... but I have a guy that wants to trade me a 61 Econoline pickup as part of a trade & cash thing and all I would do is want to flip the Econoline. But I know absolutely nothing about these trucks so I would welcome any guidance. This one has the curved rear 1/4 glass and a broken 3rd gear of the 3 on the tree.
Anyway sorry for the distraction and trozfan fantastic build! I am not worthy!
Anyway sorry for the distraction and trozfan fantastic build! I am not worthy!
#158
Launching!
Thread Starter
I'm close to 600 hours so far. I figure I have another 500 to go. I started in April 2010. It has not gone nearly as quickly as I wanted. Finding time/money and staying motivated has been hard.
#159
Launching!
Thread Starter
On a more exciting side note: I am starting to order the parts for the fuel system so I can finally here this baby run after 5 years! Just ordered Fragola PTFE stainless lines with 6an ends. Just need to get the in tank fuel pump from Tanks Inc., a battery, and do a little wiring and hopefully she will start. I will keep you posted.