Doug's Headers for A-body Chevelle LSx Conversion
#1
Staging Lane
Thread Starter
Join Date: Apr 2007
Location: Las Vegas, NV
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Doug's Headers for A-body Chevelle LSx Conversion
Saw these while I was at SEMA... not sure the difference between these and Hookers... Wish I had taken a picture of them.. well they had one side hanging as a display.... I found them on the JEGs site but no actual pic ...
http://www.jegs.com/webapp/wcs/store...0002_889174_-1
Not sure about fit but the headers looked nice. They also offer (and recomend) thier install adapters to facilitate correct fitment... The adapters look like they were cut out of flat stock plate steel. Nothing special... Just another option to look into... I will go through the numerous catalogs that I gathered for anything that might be related to conversions....
http://www.jegs.com/webapp/wcs/store...0002_889174_-1
Not sure about fit but the headers looked nice. They also offer (and recomend) thier install adapters to facilitate correct fitment... The adapters look like they were cut out of flat stock plate steel. Nothing special... Just another option to look into... I will go through the numerous catalogs that I gathered for anything that might be related to conversions....
#3
TECH Senior Member
iTrader: (12)
Has anyone seen there adapter kit.. are they made like S&P, BRP, ATS or Hookers ???
Would like to put some headers on this winter and looking at options.. at lease there is now Doug's and Hookers.. maybe the prices will start dropping some now that there are other manufactors producing swap headers..
Would like to put some headers on this winter and looking at options.. at lease there is now Doug's and Hookers.. maybe the prices will start dropping some now that there are other manufactors producing swap headers..
#4
TECH Veteran
iTrader: (7)
it looks like their a little cheaper than hookers, i think i ended up paying a little over $600 for the hookers and frame adapters, but the fit was great, real tight tuck under the body, and the caddy cts oil pan fit.
i was going to have a buddy with a cnc maching dup the hooker mount adapter, but prob wont bother-the only thing i am going to do to the headers is weld a 3 hole flange on them, dont like the slip fit
i have heard some hookers were coming w/o sensor fittings, but mine had them
i was going to have a buddy with a cnc maching dup the hooker mount adapter, but prob wont bother-the only thing i am going to do to the headers is weld a 3 hole flange on them, dont like the slip fit
i have heard some hookers were coming w/o sensor fittings, but mine had them
#5
TECH Regular
iTrader: (15)
Join Date: Feb 2005
Location: East Freetown, MA
Posts: 458
Likes: 0
Received 0 Likes
on
0 Posts
I just scored a set of 1 7/8" SC's for $200 shipped to me from this forum. They have one small hole in the collector area, but that's easily fixed...
Of course, old "Classic" did go onto my wanted thread and try to cut my throat on the deal, but fortunately, he is cheaper than even I am and ended up insulting the guy with his offer...
Anyway, once I get them, I'll let you all know how they fit with the ATS stuff.
Of course, old "Classic" did go onto my wanted thread and try to cut my throat on the deal, but fortunately, he is cheaper than even I am and ended up insulting the guy with his offer...
Anyway, once I get them, I'll let you all know how they fit with the ATS stuff.
Trending Topics
#9
On The Tree
Join Date: Jun 2007
Location: albuquerque, north mexico
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
I just scored a set of 1 7/8" SC's for $200 shipped to me from this forum. They have one small hole in the collector area, but that's easily fixed...
Of course, old "Classic" did go onto my wanted thread and try to cut my throat on the deal, but fortunately, he is cheaper than even I am and ended up insulting the guy with his offer...
Anyway, once I get them, I'll let you all know how they fit with the ATS stuff.
Of course, old "Classic" did go onto my wanted thread and try to cut my throat on the deal, but fortunately, he is cheaper than even I am and ended up insulting the guy with his offer...
Anyway, once I get them, I'll let you all know how they fit with the ATS stuff.
#10
TECH Regular
iTrader: (15)
Join Date: Feb 2005
Location: East Freetown, MA
Posts: 458
Likes: 0
Received 0 Likes
on
0 Posts
Moron, that was BEFORE that guy posted. There was a VENDOR that posted a link to his WEBSITE with brand new headers for sale.....
And I didn't tell "everyone" top go there. I told one guy.
Blome.
And I didn't tell "everyone" top go there. I told one guy.
Blome.
#11
On The Tree
Join Date: Jun 2007
Location: albuquerque, north mexico
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
if you were tellin' one guy do it with a PM, if you do it in the thread it's like standing on the roof of your house with a bull horn and yellin...........