ls1pwrdss

iTrader: (74)

guys that are running mufflers off of headers.
what mufflers are you running and how far off of the headers are yall coming

SSPerformance

iTrader: (76)

i plan on stright off the headrs

ls1pwrdss

iTrader: (74)

reason im asking is because madman is installing one of his torque arms nextweek. so i need to know what my exhaust options are

Davey J

I am using this one it is expensive but it gets me by the rules for my class anyway.I welded them right to the collectors

http://vibrantperformance.com/catalo...d13be9f1df71b1

RAGENZ28

iTrader: (5)

I've seen people modify the mounting bracket and still run y-pipes using his torque arm, someone just posts something about it with pictures.

If madman is doing the torque arm just have him bend you a piece up so it will clear the y-pipe.

BOLO

iTrader: (40)

Jet-hot long tubes /7"length 3" pipe/3" Dynomax bullets dumped

Matt D

iTrader: (49)

I have Magnaflow 4"x9" oval mufflers dumped off of the collectors.

Here is my thread about them: https://ls1tech.com/forums/drag-racing-tech/713679-3-true-duals-vs-magnaflow-mufflers-off-collectors.html

98 Silver Bullet

iTrader: (28)

Here you go. Very expensive, but look at the 6" race muffler


http://burnsstainless.com/UltraliteM...temuffler.html

Steve Burger

iTrader: (33)

Dynatech 3.5 ID x 6" dumped. I have about 10" of pipe off of the collector.

Matt D

iTrader: (49)

They do not make a 3"/3" do they? Didn't see it on the page. Those are over priced IMO.

ls1pwrdss

iTrader: (74)

very interested in these so you just welded them rite to your kooks rite.
i have kooks on my car. how do they sound and any muffler shop can weld them on rite.

sixvi6-camaro

iTrader: (9)

I have flowmaster 1 chambers on my collectors with turndowns facing in toward eachother. It did help with the fumes but made is louder in the car. the Drivers side has a 12" piece of pipe to clear the brace. Pass side is clamped straight to the collector.

Davey J

It sounds almost the same as open headers.I just put them on to pass tech for my class which requires mufflers.Yes they are very easy to install just weld them right onto the kooks and yes any muffler shop will do it as long as you tell them it is for off road because some of them are kinda funny when it comes to emission stuff(no cats)

TS6

iTrader: (41)

I did this too and it was about the best of the few I tried. Very quiet for a straight through muffler.

I have a pair like new for sale in the classifieds, FYI.