LTXBOI

iTrader: (2)

Edelbrock 3502 for TBI to mpfi would this work with my lt1 heads if i modify the bolt pattern or will i need a vic jr series

TurboS10

iTrader: (12)

I've swapped several Lt1's to gen1 pattern.
It's a pita.
I'd just buy a single plane that will allow a bigger TB.
If not, leave out the center bolts like a vortec head does.

LTXBOI

iTrader: (2)

I wanted to change bolt pattern on manifold and have a sheet metal hat made for my 58mm t.b...Im runnig a procharger on my lt1....

TurboS10

iTrader: (12)

I'd just buy a single plane

LTXBOI

iTrader: (2)

oh ok,so single plane as in victor jr or what type of single plane?

this is the intake setup i want.thats why i ask can I use this mainfold...thanks for the info though.....

IT_SS

iTrader: (5)

nail on the head!

LTXBOI

iTrader: (2)

yeap im switching up,like the flow pattern better than the stock lt manifold. for F.I....

My2kz28

iTrader: (1)

What would an intake like that run price wise? Looks sick tho and i hate lt1 intakes so this would be awesome to have for FI.

LTXBOI

iTrader: (2)

not for sure you can check summit or directly to edelbrock efi intakes i believe it was like $300 for intake!

yeah i read an article that stated with F.I setups on lt1 intake will create some cylinders to run lean,because it's forced over the 2 front cylinders pushing the air to the inside back wall and down into the plentium.Victor jr efi forces air straight down..

LTXBOI

iTrader: (2)

Yes you can use that manifold LTXBOI just make sure you machine the bolt holes to line up to the head holes.Also might want to gasket port match the manifold,and heads>>>>>>lol