Cost 450 - 500 crank hp fi set up
#1
Cost 450 - 500 crank hp fi set up
Hello all!! I would like to get 450 - 500 crank hp with my trans am and was wondering if the kits sold from vendors for 5000 to 6500 dollars would suffice for this amount of power, or would I have to spend alot more on little things here and there to reach my power goals. I am just looking for a nice daily driver and to retain my current gmmg exhaust note haha. Thank you!!
#3
Agree with JoeNova^
Also...
5000 for a kit seems rather on the expensive side, considering ebay hotsides are running for about 550
http://www.ebay.com/itm/CXRacing-Turbo-Manifold-Header-Downpipe-Kit-For-98-02-Chevrolet-Camaro-LS1-NA-T-/161139133459?pt=Motors_Car_Truck_Parts_AccessoriesOr 170 for a bitching V-band manifold if you can get around welding
http://www.ebay.com/itm/400753246597?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Also...
5000 for a kit seems rather on the expensive side, considering ebay hotsides are running for about 550
http://www.ebay.com/itm/CXRacing-Turbo-Manifold-Header-Downpipe-Kit-For-98-02-Chevrolet-Camaro-LS1-NA-T-/161139133459?pt=Motors_Car_Truck_Parts_AccessoriesOr 170 for a bitching V-band manifold if you can get around welding
http://www.ebay.com/itm/400753246597?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
#5
I would prefer to keep it FI since I daily drive my car and does the on3 kit include everything I would need for a nice daily driven, reliable turbo trans am? Or am I looking at extra expenses ontop? Thank you
#7
Restricted User
A turbo setup for only 450 flywheel seems like a huge waste. That's 4-6 pounds on a stock cam car.
Trending Topics
#9
Ok im sorry lets say 500 to 515 crank hp thats my aim so for a reliable fi all i need is that kit and a clutch correct? Would i need to upgrade my fuel system or anything else? Ty
#10
TECH Fanatic
iTrader: (45)
You will have to upgrade EVERYTHING for FI. Their is a few stickies up top with all kinds of answers. That's going to be a good place to start reading. Read all you can before you ever buy anything or your going to just be going in circles. Go to build threads and read people's threads, ask questions there.