procharger help
09-22-2006, 07:00 PM
#1
TECH Fanatic
Thread Starter
iTrader: (16)
Join Date: Aug 2006
Location: Missouri
Posts: 1,055
Likes: 0
Received 0 Likes
on
0 Posts
procharger help I came across a used procharger set up its the p1sc it doesnt include the horn or air pump relocation brackets, or optional FMU, and the crankshaft damper bolt came loose and the balancer pulley came loose, also the plastic airbox is broke where the clamp goes around it. it does have a heavy duty trutech mounting bracket and everything else.
The guy wants $1700 for it...is it a good deal? What all would i have to buy to get this thing running good?
Also what kind of RWHP am i looking at?
The guy wants $1700 for it...is it a good deal? What all would i have to buy to get this thing running good?
Also what kind of RWHP am i looking at?
BOSS APPROVED!
Trending Topics
09-23-2006, 03:32 AM
#8
Bought my setup in pieces as well, got the rest through BOB@ EPP. Saved a bunch. You can get a way with out the horn and airpump relocation kits.
You dont need the FMU! Will need new injectors, and a good tunner!
Off to a good strat with the better bracket.
Better off to replace the plastic airbox and go with alum.
Sounds like a 6 rib will need to upgrade to a 8rib.
You dont need the FMU! Will need new injectors, and a good tunner!
Off to a good strat with the better bracket.
Better off to replace the plastic airbox and go with alum.
Sounds like a 6 rib will need to upgrade to a 8rib.
09-23-2006, 12:48 PM
#9
Thanks everyone, I appreciate it! The horn bracket and air pump relocation brackets aren't that vital, as has been mentioned, you can make do without them. We may even have a couple left over from builds on our shelves. I also suggest not using an FMU, but install a larger Walbro 255 hp in tank fuel pump, pick up some 42lb fuel injectors, and get a dyno tune. The 42 lb fuel injectors can be found used easy enough these days, as many are upgrading to 60lb injectors as they escalate the power level of their engines. I can get you the new crank bolt, and anything else you need. On the six rib kit, normally when the crank bolt comes loose, the three little pins on the ProCharger crank pulley bend, but usually the pulley is fine other than that.
Its a good price, provided nothing is wrong with the head unit. Bob
Its a good price, provided nothing is wrong with the head unit. Bob