Push rod and Valve spring choice help
11-06-2013, 10:32 PM
#1
Registered User
Thread Starter
Join Date: Oct 2013
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Push rod and Valve spring choice help i am getting a comp cam 230/236 with lsa 112+4 .602/.592 ! Im wondering what would be the cheapest pushrods and valve springs to get but to run my car properly! ls1. i have heard of people using the wooden sticks as push rods but i dont know to much bout that or if its healthy! someone help!
11-07-2013, 12:50 AM
#5
TECH Fanatic
i am getting a comp cam 230/236 with lsa 112+4 .602/.592 ! Im wondering what would be the cheapest pushrods and valve springs to get but to run my car properly! ls1. i have heard of people using the wooden sticks as push rods but i dont know to much bout that or if its healthy! someone help!
11-07-2013, 12:56 AM
#6
Those wooden sticks works great I run them 
I spin my motor to 10k rpm 
make sure you get the harden wooden sticks though or they might break
I spin my motor to 10k rpm make sure you get the harden wooden sticks though or they might break Last edited by chevybayboy; 11-07-2013 at 01:07 AM.
11-07-2013, 09:06 AM
#11
11-07-2013, 09:37 AM
#12
i am getting a comp cam 230/236 with lsa 112+4 .602/.592 ! Im wondering what would be the cheapest pushrods and valve springs to get but to run my car properly! ls1. i have heard of people using the wooden sticks as push rods but i dont know to much bout that or if its healthy! someone help!