BOLO

iTrader: (40)

Callies Compstar

SHovV

iTrader: (1)

Why the compstar crank and their billet rods, and not compstar / compstar or dragonslayer / billet rods?

BOLO

iTrader: (40)

Had a great deal on the billet rods that I could not pass up. Besides rods are the weak link most often, correct?

BOLO

iTrader: (40)

Just gotta word from BP Automotive. The wiring harness should be here this coming week. And as mentioned, I'm working on a narrowed Strange S60 with 35 spline axles,spooled 4.30 gearing and new Strange rear brakes. I'm also looking on a complete new set of wheels, especially due to the narrowed rear--3" per side. She mind as well look good going down the track with a new set of wheels.LOL.

BOLO

iTrader: (40)

Wiring harness arrived today.
Bill at BPAutomotive's quality workmanship is second to none, as you can see in these pics.

sbf

so you gonna use a stock computer to run all that horsepower

Mavn

iTrader: (3)

Stock computers are able to handle anyting you can thow at it if you have a good tuner

BOLO

iTrader: (40)

Why not? It's good to 8000+ rpm. And I do have an excellent tuner. Besides, this is not a full tilt racecar.

BOLO

iTrader: (40)

I received my AeiCnc custom vacuum pump bracket kit today. Just gotta get through this cold, Chicago weather so I can finally button it up and wake up this beast! Anticipation is making me wait.....
New narrowed rear and new set of wheels/tires are on their way as well!

Jimbo1367

dude, you're killing me. LOL

tadams72

Maybe I missed it. What are you going with on the vacuum pump setup?

xdanny510x

esta bien chingon tu BUild ME LIKEY...btw i see ur from the state of ill.. thats my home away from home..

BOLO

iTrader: (40)

How do you think I feel brother?

The ATI hub with a gilmer type pulley and the custom bracket is specifically made to work with a either a 3 or 4 vane Moroso vacuum pump.

Whatever you say man, hope it's a compliment, thank you.

BOLO

iTrader: (40)

xdanny510x

Said ur build is bad ***! Lol

BOLO

iTrader: (40)

Gracias amigo!

tadams72

What's the mounting position going to be? Seriously considering the GX Motorsports setup. Going to monitor how it's doing with the Norris Motorsports catch can and RX clean side separator for awhile first.

Hopefully will be on the dyno in the next couple weeks.

BOLO

iTrader: (40)

This is the vacuum set up that I will be utilizing.

SHovV

iTrader: (1)

With a AC replacing low mount like that, I don't see why someone wouldn't just step up to a multi stage dry sump setup, aside from cost mainly.

tadams72

Cost was it for me. Couldn't swing $3-5k on a dry sump. Made quite a few oiling miss that will be more than acceptable for my use I believe. Once I get some track time I'll verify.

Yeah I've got to keep the A/C but they make an upper passenger head mount I might go with.