LS7 valves/springs/pushrod length??
#1
TECH Fanatic
Thread Starter
iTrader: (9)
Join Date: Feb 2002
Location: Morton IL
Posts: 1,126
Likes: 0
Received 0 Likes
on
0 Posts
LS7 valves/springs/pushrod length??
Has anyone got any idea's yet on stainless valves, and 'good' springs that will allow me to run a big cam? I believe the installed height is 1.980 vs 1.800 in the ls1/6 heads. The valves are 2.20 x 1.610 I believe, but are also longer.
Also, any guesses as to pushrod length?
Also, any guesses as to pushrod length?
#6
Staging Lane
iTrader: (7)
Join Date: Mar 2005
Location: cleveland OH
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
I was talking to him today and i was told they are the same length. The offset is done in the rocker so the push rod and lifter are in the same position as any Gen 3- Gen 4.
He is calling me back tommorow and i will double check. Also the reason he is calling me back is to hopefully give me some flow #s on the heads.
He is calling me back tommorow and i will double check. Also the reason he is calling me back is to hopefully give me some flow #s on the heads.
Trending Topics
#12
TECH Senior Member
iTrader: (4)
Originally Posted by Badls6SS
I was talking to him today and i was told they are the same length. The offset is done in the rocker so the push rod and lifter are in the same position as any Gen 3- Gen 4.
He is calling me back tommorow and i will double check. Also the reason he is calling me back is to hopefully give me some flow #s on the heads.
He is calling me back tommorow and i will double check. Also the reason he is calling me back is to hopefully give me some flow #s on the heads.