00 black ss

iTrader: (9)

so after jumping back and forth about cams and different setups i finally choosed one and got the setup built. here is the setup

ms3 on a 112 with prc valvetrain
pacesetter coated lts
pacesetter ory
flowmaster muffler/magnaflow catback pipes
ls6 intake and stock ported throttle body
slp lid and smooth bellow
ssra
4.10s

Big thanks to J and T auto for the gear install and a special thanks to member Iverson387 for doing the cam and bolt on install. the car is getting tuned on tuesday by vettetech on long island.

Black FormulaLs1

iTrader: (10)

make sure that you post pics of the build and the finished product with the dyno sheet!!! and how much do you have invested in it?

00 black ss

iTrader: (9)

dont have pics of the build but when its tuned ill post up the dyno sheet. i would say i have around 2-4k approximately into it including parts and labor.

00 black ss

iTrader: (9)

actually deffinately more like 4-5 grand i have invested in it. 3 more days for dyno results! how much is most people making with a similar setup? how much power should i make around?

HWI

iTrader: (2)

You need a cut-out so that crapmaster muffler doesn't hold you back.

00 black ss

iTrader: (9)

i have a cut out just didnt put it on. do you guys think its worth putting it on? i know the flowmaster cut out is crap but is it a different muffler they use on the cat back or same one?

Zach79Z

iTrader: (21)

Yes run it with the cutout open when it is dynoed. Itll have WAY better numbers then through the flowmaster

00 black ss

iTrader: (9)

Would I make it to 400 at the wheels without the cutout? How much more will the cut out add if I put it on?

Lt1Porsche

iTrader: (6)

your gonna need that cut out to hit 400+

Juicy J

iTrader: (5)

I would say you should be in between 405-415hp with open cut out depending on what dyno you are on. The Flowmaster will hold you back quite a bit.

00 black ss

iTrader: (9)

car made 386rwhp and 343rwtq on a very humid day and this was on pull number 6. hes going to change some things and wait till it cools down and try again. im hoping to get 390-395. i would really like to hit 400 but im going to need the cut out for that.

Zach79Z

iTrader: (21)

Nice. Cant wait to hear the final numbers

vsocks1

iTrader: (6)

Do you have plans to put some nice heads on that car?
That should wake it up quite a bit!

00 black ss

iTrader: (9)

Yes I plan on doing heads,spray,rear and suspension in the future. Is the 4.10s holding some power back also? If so how much?