darkostoj

iTrader: (1)

just curious if there is anything out there that will clear the a/c compressor on the passenger side when building a turbo kit?

TheLS1Lover

C6 LS2 drive side manifold will clear, but you have to use a turbo K-member.

darkostoj

iTrader: (1)

is there any difference between the ls2 and ls3 manifold? I thought they were the same

95wannabe

iTrader: (20)

drivers side manifold or passenger side?
This gentlemens thread in post1 shows he's using what i would assume is the passenger side manifold. Is that right?
https://ls1tech.com/forums/forced-in...ird-build.html

Jakson

iTrader: (50)

LS2 and LS3 C6 are the same. I'm using a C6 drivers side mani on the passenger side going around the ac. Here is a pic without the compressor on, but you can see how it would go around it. Check the link in my sig to the build thread for a few more pics.

JoshuaGrooms83

iTrader: (2)

would it fit with a UMI RR K-memeber? just curious

darkostoj

iTrader: (1)

is that 02 sensor location in the manifold a good location?

red281gt

iTrader: (6)

Look at nick.cellis on here i think his custom one clears. Pm him he has a thread on here and his kit looks sick!

TheLS1Lover

No, you have to have a turbo style K-member for the crossover piping coming from the manifold to go through.

JoshuaGrooms83

iTrader: (2)

cool, thanks for the heads up. was just wondering with what i got. The umi RR K-memeber is pretty beefy so im not replacing that anytime soon lol especialy since i put it in myself about a year ago. That, was a pain in the *** lol

regblkss

I have a hinson turbo manifold off my c5 that would clear and can be easily modified to work on a f body.

baggins

iTrader: (21)

Sub'd