Quickin

Is the S95 larger as in how fitting in into a space?

And what "mm" are they as opposed to the GT55's 91 "mm"?

Curious because I can't find any info on the S95.


.

foxspy

iTrader: (1)

The S95 is a 95mm compressor wheel, as far as I know.

I'm still looking for the physical deminsions of the S95 myself.

hellbents10

iTrader: (10)

I am sure Jose will chime in here as I would like to know some more about it too.

Stupid Boost

iTrader: (1)

I spoke to Jose about this, and he said the S95 is a little larger then the GT47-88 in outer size.The GT55 is a 91mm from the factory.The garretts are nice turbos, but they aren't reliable for what we use them for (high boost diesels).

foxspy

iTrader: (1)

I'd like to see some pics, or some actual numbers on total height, width, length.

Quickin

I was told about it by him, I think it's gonna be the one to use.


.

hellbents10

iTrader: (10)

Right on thats what he has been telling me, I have a S78 on the way for a customers car right now, should be hot cannot wait.

DrTurbo

iTrader: (3)

I know this post is a little old, but folks have been wondering about the S95 vs GT55.

Well we tried a single S95 on a Outlaw 10.5/ 3200+ lbs car running low boost @ 23psi.

Car turned a 4.71 in the 1/8th...and this was shakedown times..... Now another one will be mounted for twin S95's

VINCE

iTrader: (1)

You have been researching a turbo setup for a long time now. I thought I was bad. Have you lowered the compression yet on your motor or are you planning an entirely new motor? You do have a bunch of options....

obZidian

iTrader: (2)

so the s95 is larger than a s88, correct? I know its still in development, but what about the s91?

Beaflag VonRathburg

iTrader: (176)

Here's some pictures that were posted of a S95:
https://ls1tech.com/forums/showpost....78&postcount=1

Armageddon

iTrader: (41)

That 95 is supposed to be bigger than the Garretts I thought.

FormulaFire

iTrader: (20)

very impressive

DrTurbo

iTrader: (3)

The S95 is on a thumper chassis, and not a midframe like the S88 and possibily the S91 if it makes it into production.

DrTurbo

iTrader: (3)

Same size as the T91's and up.

obZidian

iTrader: (2)

lets give the gods a good christmas so that s91 can make it!!

its just what i need... got that checkn' account just itching for the green light and the wife giving me "the look"