Automatic Transmission - what converter for my car?????



PDA

View Full Version : what converter for my car?????

layz
12-07-2006, 06:37 PM
i have a 2000 z28 with ported throttle body,lid, true duals with single chambers,2.73 gears, soon to have a built tranny, my tranny is slipping right now. i am wanting to put a aftermarket stall converter, with gears. what would be the best gears and stall converter for what i have done to my car....cam is going in after it is paid off. not really worried about a cam right now just stall and gears. ( i was thinking of a 4k stall and 3.42) what does everyone think about my setup and stall converter and gears....

performabuilt
12-07-2006, 06:44 PM
as long as its a pretty tight converter a 3500 to 4000 should be great
GregWS6&z28
12-07-2006, 07:39 PM
Yank SS3600 will be tight with those 2.73's.

bad2000z
12-08-2006, 11:57 AM
3.42's with a 4000 stall sounds pretty good to me, especially if you're gonna put a healthy cam in it later.
Yank
12-08-2006, 01:44 PM
Yank SS3600 will be tight with those 2.73's.



Sound great to me!!
Joel_SS
12-08-2006, 02:43 PM
Go with a Yank SS series, you will not be disappointed..
00formLs1
12-08-2006, 05:34 PM
3500-4000 stall size 3.42-3.73 for gears sound good.
Urban Legend
12-08-2006, 08:02 PM
Go with a Yank SS series, you will not be disappointed..


Call Dave @Yank and see what he thinks. I love Yank converters.
Hell'sChariot
12-08-2006, 08:25 PM
ss4000 too big for stock 3.23?
Figz Z28
12-08-2006, 08:49 PM
Get a SS series and at least 3.73. Give yank a call Dave will point u in the right direction. You wont be disappointed with a Yank!!
TonyGXP
12-09-2006, 12:11 AM
spend the extra $$ and get a Vig.. why you ask? cause I did lol... just Don't get a TCI.... good luck My 3400 multidic 3 plate 9.5" would rock that car.. my 5k lbs brick is pulling 1.6 60' (6 runs in an hour without slowing down) with basically nothing done to it... it's that Converter....
ws6togo
12-09-2006, 12:20 AM
Get at least a 4000 stall YANK PT is the shit. I would get the 3.73 gears though to make the setup rock !!
Hell'sChariot
12-09-2006, 12:23 AM
spend the extra $$ and get a Vig.. why you ask? cause I did lol... just Don't get a TCI.... good luck My 3400 multidic 3 plate 9.5" would rock that car.. my 5k lbs brick is pulling 1.6 60' (6 runs in an hour without slowing down) with basically nothing done to it... it's that Converter....
are the mods in your sig everything..? :eek2:
12.5!! I didnt think those trucks were that badass! Dayum!
Very nice!!