SEDUCE

hey guys i have a zex wet kit with a purge and i was just wondering if someone can do me a wiring diagram for it with a switch for the nos and a push button switch for the purge thanks alot


also can someone show me a pics of their fuel line to nmu please

SEDUCE

Any One???

SEDUCE

Can Someone Here Help Me At All I Am Trying To Get This Installed And I Am Stuck Cheers

01Z28M6

I installed the 82026 wet kit with a purge but can't come up with a visual diagram. I can answer some questions and tell of the things I did but that might not be what you are looking for. If a text reply will do, let us know and I'll be as clear as I can.

SEDUCE

thanks mate yeah i just need a wiring diagram if i can to help me out.
which wire out of the three does the whit one go to ???on the tps

BOTTLEFEDLS1Z

iTrader: (32)

Did you look at the stickies at the begining of the N20 section? Some sponsors have some good wiring diagrams that will help ya out.

01Z28M6

White wire clips to the blue. That will be the variable signal voltage that the pcm reads. Take note; the hook-up caused a fast idle for my application and interfered with my A4 shifting. Zex (Comp Cams) sent a 9k resistor to fix the problem.

I can walk you through the rest of the installation but need to get some clarity of thought back if you know what I mean.

SEDUCE

Thanks mate so the white wire to the blue on the tps sensor?
mine is manual 6 spd so hope it dont play up.
i looked threw all the wiring diagrams but none with what i want