The y-pipe doesnt looks better than the other ones ive seen. none of the ypipes ive seen look good where it merges.

if you dont mind could you post up some more pics of the outside of the ypipe. thanks

 

That looks like crap.

 

Definetly is pretty scary looking

 

You think that's bad, you should see the the merge inside my Flowtech y pipe. It's just a little round hole less than 2" diameter.

 

My jet hot y pipe was nothing to brag about but at least it didnt have a half inch lip around the inside of the merge

 

I bet you that y pipe was made on either a Monday or a Friday

 

does the package deal (headers & y) come with anything else like gaskets, clamps, bolts etc?

 

You just reuse your stock bolts and gaskets. The stock gaskets are metal and can be used over and over. The Y does come with U bolt clamps but I would recommend getting band clamps.

 

Show me yalls perfect Y pipe....

 

pics were posted in the next post

 

Yeah my jethot ory had alot of over hang at the merge. I cut it out and got some mandrel bends and put a flowmaster merge in.

 

how would you go about trying to fix the merge of a y? just get a drill with a grinding attachment and try to grind down as much of the lip as possible without cracking something?

 

I wouldnt even worry about it honestly. Youre not going to see a difference.

 

GP prices end May 31

 

Got the headers and y. The fit was great and they looked awsome. Very fast shipping. If your debating if their worth it, YES they are.

Did have two minor prob. The first was the y was a pain in the *** to get in with the catback still hanging there. The second was that I did not get all the peanuts out of the pipes from shipping. So when I cranked it up and reved it up for the first time peanuts shot out the tail pipes

 

Yea you should use a air hose to blow thru all the pipes to make sure all the peanuts are out

 

I made my own, but I don't have any pics. It is 3 inch mandrel bends from headers to Flowmaster 2x3 into 3.5 inch merge to 3.5 inch cutout to Flowmaster 3.5 to 3 inch reducer. It may not be perfect...but it damned sure flows more than most of the store bought Y pipes I have seen.

Galen

 

Reviews like this make this a tuff choice. I just broke a AIR bolt off in my manifold too.

 

Jsut ordered em.....will let evryone know how they look an can't wait to get em....THanks for the great deal!!!

 

PM Sent