Lets talk REAL DEAL DEEP DISH! Not that Vette DD crap!
#1
Banned
Thread Starter
iTrader: (20)
Join Date: Apr 2009
Location: Inside Your Girlfriend
Posts: 1,120
Likes: 0
Received 0 Likes
on
0 Posts
Lets talk REAL DEAL DEEP DISH! Not that Vette DD crap!
I am looking for something that would be deep enough to drown a few cats, lol... I see all these threads talking about deep dish this... and deep dish that... just to click on it and be disappointed to see something that is not even deep enough to fit a hand from tip to wrist.
Below are some READ DEAL deep dish wheels, but will they fit!? Some of these go up to 16" W I D E so I don't know if the pic is reflecting those, so a 10" wide may not be as profoundly deep.
What is the widest we can go in the rear without mounting issues? I have a MWC Fab9 so it can be cut, but what is the widest we can run uncut as well as a MAX cut rear?
Here are some pics of what I's likey, anyone else running these?
American Racing Pro Series TrakStar 480R
Billet Specialties Street Lite
Center Line Convo Pro
Center Line Fuel Wheel
DM
Below are some READ DEAL deep dish wheels, but will they fit!? Some of these go up to 16" W I D E so I don't know if the pic is reflecting those, so a 10" wide may not be as profoundly deep.
What is the widest we can go in the rear without mounting issues? I have a MWC Fab9 so it can be cut, but what is the widest we can run uncut as well as a MAX cut rear?
Here are some pics of what I's likey, anyone else running these?
American Racing Pro Series TrakStar 480R
Billet Specialties Street Lite
Center Line Convo Pro
Center Line Fuel Wheel
DM
Last edited by Devils Mentor; 04-27-2010 at 01:44 AM.
#2
I think some of those are excessive, but I've been wanting some real deep dish for a while now. A member on here has deep dish shelby wheels with 335's I believe on a red camaro. Looked amazing
#5
Banned
Thread Starter
iTrader: (20)
Join Date: Apr 2009
Location: Inside Your Girlfriend
Posts: 1,120
Likes: 0
Received 0 Likes
on
0 Posts
DM
Now if they came in something like I posted above then that would be ****!
DM
DM
Trending Topics
#13
Banned
Thread Starter
iTrader: (20)
Join Date: Apr 2009
Location: Inside Your Girlfriend
Posts: 1,120
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the pics, but I realize now that I was talking about the guy who did the DD Vette wheels. IIRC he had them cut and widened, but like I said, I don't recall a pic of them. I guess they were just WIDE and on DEEEEP.
Again, thanks for the pics! Though they were not the ones I was thinking of, it is cool to see them.
DM
Again, thanks for the pics! Though they were not the ones I was thinking of, it is cool to see them.
DM
#14
TECH Fanatic
iTrader: (10)
Join Date: Mar 2008
Location: San Antonio
Posts: 1,448
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the pics, but I realize now that I was talking about the guy who did the DD Vette wheels. IIRC he had them cut and widened, but like I said, I don't recall a pic of them. I guess they were just WIDE and on DEEEEP.
Again, thanks for the pics! Though they were not the ones I was thinking of, it is cool to see them.
DM
Again, thanks for the pics! Though they were not the ones I was thinking of, it is cool to see them.
DM
#15
11 Second Club
iTrader: (11)
Getting a deep dish like that is going to require the rear narrowed. Basically the more its narrowed the more dish your going to have. There is a guy on here that has a red Camaro or TransAm that I think the rear is narrowed about 4 inches on both sides and it has a real nice set of Boze wheels on it. That's prolly the type of setup I would go with. I'll try and find the car and post some pics and more info if I can find it.
edit- I found a pic of the car. Still looking for more info.
edit- I found a pic of the car. Still looking for more info.
#16
Banned
Thread Starter
iTrader: (20)
Join Date: Apr 2009
Location: Inside Your Girlfriend
Posts: 1,120
Likes: 0
Received 0 Likes
on
0 Posts
Getting a deep dish like that is going to require the rear narrowed. Basically the more its narrowed the more dish your going to have. There is a guy on here that has a red Camaro or TransAm that I think the rear is narrowed about 4 inches on both sides and it has a real nice set of Boze wheels on it. That's prolly the type of setup I would go with. I'll try and find the car and post some pics and more info if I can find it.
edit- I found a pic of the car. Still looking for more info.
edit- I found a pic of the car. Still looking for more info.
Mmmm... Now were getting somewhere, lol, thanks for the pic!
DM
#18
11 Second Club
iTrader: (11)
Ok I found the thread. It doesn't say exactly the specs on the rear but nothing a little PM won't take care of. For a stock wheelhouse I would say the widest wheel you could run would be a 12" possibly a 13" wheel if it has the right backspacing.
on to the thread. https://ls1tech.com/forums/wheels-ti...ze-forged.html
on to the thread. https://ls1tech.com/forums/wheels-ti...ze-forged.html
#19
Banned
Thread Starter
iTrader: (20)
Join Date: Apr 2009
Location: Inside Your Girlfriend
Posts: 1,120
Likes: 0
Received 0 Likes
on
0 Posts
Ok I found the thread. It doesn't say exactly the specs on the rear but nothing a little PM won't take care of. For a stock wheelhouse I would say the widest wheel you could run would be a 12" possibly a 13" wheel if it has the right backspacing.
on to the thread. https://ls1tech.com/forums/wheels-ti...ze-forged.html
on to the thread. https://ls1tech.com/forums/wheels-ti...ze-forged.html
DM