Full exhaust/lid only 12.7@112!! :)
12-05-2008, 04:09 AM
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: Feb 2006
Location: ATX
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Full exhaust/lid only 12.7@112 Vid/Pics!! ;) Went to the track finally and got a best of 12.7@112 out of 13 runs, 10 of which were trapping in the 112's.
Car is a 2k2 z28, 118k on the clock
has full hooker exhaust,lid, ls7 clutch and eibach's, only mods.
i've had the car for a little over 3 years now and have always been told it runs really hard for what it is. I had absolutely no tire, completely bald.
the BMW I ran is my friend it is a TT 335i with dinan stg.3 tune,exhaust.
Me:
3110lbs. (pic below)
60ft - 2.09
1/8 - 8.4/88.51
1/4 - 12.7/112.87
Bimmer:
60ft - 2.00
1/8 - 8.41/86.03
1/4 - 12.9/108.15
Here's the vid
http://www.youtube.com/watch?v=dMwSsOSEH9I
Car is a 2k2 z28, 118k on the clock
has full hooker exhaust,lid, ls7 clutch and eibach's, only mods.
i've had the car for a little over 3 years now and have always been told it runs really hard for what it is. I had absolutely no tire, completely bald.
the BMW I ran is my friend it is a TT 335i with dinan stg.3 tune,exhaust.
Me:
3110lbs. (pic below)
60ft - 2.09
1/8 - 8.4/88.51
1/4 - 12.7/112.87
Bimmer:
60ft - 2.00
1/8 - 8.41/86.03
1/4 - 12.9/108.15
Here's the vid
http://www.youtube.com/watch?v=dMwSsOSEH9I
Last edited by atxz/28maro; 12-05-2008 at 05:52 AM.
12-05-2008, 05:44 AM
#4
11 Second Club
12-05-2008, 02:57 PM
#6
On The Tree
Thread Starter
iTrader: (2)
Join Date: Feb 2006
Location: ATX
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
I was all the way on the scale form what i could tell. It was the one at San Antonio Raceway. there is a lip on the side and my tire is not touching the ground. I couldn't believe it so I took pics.
Here's a video from the same night of me vs. a cammed c6 z06 for fun.not too shabby till the 1/8
my 12.8@112 vs. his 11.7@138 I believe. i'll look at the slip later
Video:
http://www.youtube.com/watch?v=ptU5k16u8cM
Here's a video from the same night of me vs. a cammed c6 z06 for fun.not too shabby till the 1/8
my 12.8@112 vs. his 11.7@138 I believe. i'll look at the slip later
Video:
http://www.youtube.com/watch?v=ptU5k16u8cM
Last edited by atxz/28maro; 12-05-2008 at 03:03 PM.
Trending Topics
12-11-2008, 06:00 PM
#13
